ZON utility found my switch but I can get to the IP address

Options
eliljey
eliljey Posts: 2
First Comment
edited March 2023 in Switch

I just got a XGS1210-12 switch that I'm using to build a small, isolated lab network off of my PC. The network connection goes through a Benfei USB-C to Ethernet adapter.

The ZON utility came up and found it right away, but I can't open it in a web browser (launched from the utility or doing it manually) or ping it. It's currently using DHCP and giving me an IP of 192.168.1.3 but I've tried a static IP as well.

Any ideas why the utility can talk to the switch but I can't get to it any other way?

All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 3,429  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate

    Hi @eliljey,

    Do you mean you cannot access or ping your switch?

    This is more likely because your PC does not have an IP address, the IP address is using a different subnet with the switch, or there has an IP conflict. Please check your PC's IP address first.

    The ZON Utility uses Layer 2 protocol to scan the switch. Therefore, you can get the device information within the above scenario.

    Zyxel Melen


  • eliljey
    eliljey Posts: 2
    First Comment

    I had to change the IP addr of my USB network adapter and switch so they all played together and it works. Thanks for the tip!

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）