NWA50AX keep rebooting every 2-3 minutes and I can’t reached web config.

Hi @Mo7d ,

Here are some steps you can take to troubleshoot the problem:

1. Reset Your AP to Factory Default.
   1. If your AP is currently registered under Nebula cloud mode, please remove it from the organization and switch it to standalone mode. You can find step-by-step instructions in this article:
      https://community.zyxel.com/en/discussion/17872/how-to-remove-your-device-from-nebula-and-administer-it-locally
   2. Then, press and hold the reset button on the AP until the LED blinks(This typically takes around 10 seconds).
   3. Attempt to access the AP's local web GUI after the reset to see if the AP stabilizes. Please let us know if you encounter any improvements.
2. Upgrade to The Latest Firmware.
   To ensure your AP's optimal performance, consider upgrading it to the latest firmware(V6.29P1) through ZON utility. You may refer this article for upgrading firmware by ZON:
   https://community.zyxel.com/en/discussion/15648/how-to-upgrade-firmware-by-zon

If the problem persists, kindly provide us with the following details to help us further diagnose the issue:

1. Provide us your AP’s S/N and MAC address through private message.
2. Please let us know when the AP started repeatedly rebooting. Did this condition begin immediately after the first installation or after a specific action?
3. What is the current firmware version installed on your AP?
4. How is your NWA50AX powered? Is it using PoE (Power over Ethernet) or a power adapter? Please ensure that the AP is receiving sufficient power to operate.

Alternatively, if your AP is under Nebula Cloud mode, enabling Zyxel Support and providing your org/site name will help us directly investigate your site.

Hi @Mo7d

As we've discussed in private msg, the symptom exhibited by your AP indicates a hardware issue. Kindly reach out to your local reseller to initiate the RMA process.