NAS542 - Teardown video/instructions?
Does anyone have instruction (or video) of how to open NAS542 entirely?
(Didn't find anything on Youtube or via Google search… 😐️)
I just realized how much dust it has collected inside the chassis and thought that a proper cleaning might keep the temp down a bit at least…
Accepted Solution
-
In the past have opened both a 326 and a 540. In both cases it's basically removing every visible screw, and splitting the housing on two seams. As far as I remember the seams on the 540 were harder than the seams on the 326. The latter could be opened with some careful prying. On the 540 I needed a table knife to pry open the clips on the inside, while the steel frame was still inside.
1
All Replies
-
I've found some helpful videos that might assist you. However, I couldn't find a disassembly guide specifically for the Zyxel 540.
0 -
In the past have opened both a 326 and a 540. In both cases it's basically removing every visible screw, and splitting the housing on two seams. As far as I remember the seams on the 540 were harder than the seams on the 326. The latter could be opened with some careful prying. On the 540 I needed a table knife to pry open the clips on the inside, while the steel frame was still inside.
1 -
OK, thanks for answers!
I'm going to give it a try as the box looks like it needs a thorough cleaning… ;-)0
Categories
- All Categories
- 397 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 91 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 919 WirelessLAN
- 35 WLAN Ideas
- 5.9K Consumer Product
- 210 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 928 Nebula FAQ
- 422 Security FAQ
- 238 Switch FAQ
- 210 WirelessLAN FAQ
- 47 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight