LTE5398-M904 enable WAN ping

ivx675
ivx675 Posts: 10  Freshman Member
First Answer First Comment First Anniversary
edited January 4 in Mobile Broadband

Hi,

How to enable WAN IP ping ?

I tried to disable firewall, open new ACL rule in firewall for ICMP - nothing seems to work. I can ping public IP from LAN, but not from internet. All TCP port firewall and NAT rules work ok, so ISP TCP/UDP ports are open for my IP. I assume ICMP traffic not blocked by ISP.

Security → Firewall → Access control

#

Name

Src IP

Dest IP

Service

Action

Modify

ICMP

Any/32

Any/32

ICMP

Accept

Thanks

All Replies

  • Internetheavyuser
    Internetheavyuser Posts: 96  Ally Member
    5 Answers First Comment Friend Collector First Anniversary

    There are two steps to decide whether you can ping from the WAN side.

    1. Did you enable the PING function from the WAN?
    image.png

    2. Did you have WAN IP? Please check the reserved IP table. If you get the IP from the reserved IP table then you cant ping from the IP you have.

    https://en.wikipedia.org/wiki/Reserved_IP_addresses

  • ivx675
    ivx675 Posts: 10  Freshman Member
    First Answer First Comment First Anniversary

    Hi,

    LTE5398 has different UI. There is firewall Direction: "WAN to LAN" and "WAN to Router", none of these work.

    »2. Did you have WAN IP? Please check the reserved IP table. If you get the IP from the reserved IP table >then you cant ping from the IP you have.

    As said, i have public IP and all NAT port(TCP/UDP) forwards work ok, just ICMP is blocked.

    https://en.wikipedia.org/wiki/Reserved_IP_addresses

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）