MPro Mesh WPA3 settings setup

Jclerk · December 2023

I recently purchased a WX3100-T0 to extend my WIFI.
I realised that some devices are willing to roam from the extender to the router (
EX5601-T1) but will never roam back.

After some digging, I realized that the Mpro mesh setup does not copy the WPA settings correctly.
My router is set to WPA3-SAE/WPA2-PSK while the extender is set to WPA2-PSK.
Both support the same modes; the settings are just not copied correctly.

Is this a known bug, does someone know how to fix it?

Brt · April 2024

Same problem here.
As of version 5.50(ABVL.1.1)C0 of the WX3100 firmware this problem is solved.

https://www.zyxel.com/global/en/support/download?model=wx3100-t0

Liba · January 2024

Maybe you can try using the same WPA settings for the router and WX3100.

Jclerk · January 2024

https://community.zyxel.com/en/discussion/comment/61482#Comment_61482

I have tried that, but the router automatically reconfigures the WX3100 after I set the settings manually. I have also updated the WX3100 to the latest firmware, but it had not effect on this issue. I suspect the issue is with the router pushing the wrong config. This would mean that the router requires an update, but i have yet to find a page with the firmware for this router.