Ztp is already enabled. Please report to administrator for troubleshooting

2

All Replies

  • smb_corp_user
    smb_corp_user Posts: 168  Master Member
    5 Answers First Comment Friend Collector Second Anniversary

    Sorry for not posting sooner. I must defer to the ZyXEL team members for a solution to this issue.

  • Marcointegrated
    Marcointegrated Posts: 21  Freshman Member
    First Comment First Anniversary

    ok, I and the other user are waiting for updates

  • Dennis_aE
    Dennis_aE Posts: 2
    First Comment First Anniversary

    I am experiencing this issue as well. Please provide us with a resolution.

  • Proxima
    Proxima Posts: 2
    First Comment

    Good morning,
    I am also in the same situation. Can we deactivate the ZTP via the CLI and return to the WebGui interface?
    Maybe go back to an old configuration?

  • smb_corp_user
    smb_corp_user Posts: 168  Master Member
    5 Answers First Comment Friend Collector Second Anniversary

    There are some other pages outlining how to deal with the ZTP issue. See for example this Google search result:

    set system ZTP disable

  • Marcointegrated
    Marcointegrated Posts: 21  Freshman Member
    First Comment First Anniversary

    But to be able to disable the ZTP is a procedure that must be carried out on the switches or on the firewall? On the guide you sent, it looks like this.

  • Marcointegrated
    Marcointegrated Posts: 21  Freshman Member
    First Comment First Anniversary

    Can this configuration be valid to insert into the putty console for the zyxel vpn 100 firewall?

  • Marcointegrated
    Marcointegrated Posts: 21  Freshman Member
    First Comment First Anniversary
    edited January 30

    https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u0000001UiOCAU&lang=en_US%E2%80%A9

  • Proxima
    Proxima Posts: 2
    First Comment

    does not work

    image.png

  • Dennis_aE
    Dennis_aE Posts: 2
    First Comment First Anniversary

    Is it true that ZTP is available when the Zywall is in SD-WAN mode(VPN100 user guide)? If that is true then does that mean that my Zywall VPN is not standalone anymore and is in SD-WAN mode?

    Then the only way to go back to being standalone is by factory resetting my router?

    "Note: If your ZyWALL VPN is in SD-WAN mode and want to return it to standalone mode, you
    need to reset the ZyWALL VPN to the factory defaults using the reset button (see the
    Troubleshooting chapter)." - Section 1.2 SD-WAN Mode of the VPN100 User's guide version 5.37

Categories

Security Highlight


Read more

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）