How to use Antenna ports in Nebula FWA510 ?

Fadhil
Fadhil Posts: 18  Freshman Member
First Comment Friend Collector
edited February 6 in Nebula

Hello everyone

I am using zyxel fwa510 and living in an area with 4G only ...and the 4G signal is poor.

The router has 4 ts9 external antenna ports and I need your help to choose which pair of ports is for 4G (band 1 2100 mhz and band 3 1800 mhz only are available here).

I am using Kaser Panel V3 antenna mimo 2x2 (two cables out of the antenna).

I need your kind help 🙏

Accepted Solution

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,631  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula
    Answer ✓

    Hi @Fadhil ,

    The TS9 connectors are designed to support frequencies ranging from 698 to 4200 MHz. In your specific circumstance, you can connect an antenna to any of the FWA510's external antenna ports.

    Judy

    Untitled Image

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

All Replies

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,631  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula
    Answer ✓

    Hi @Fadhil ,

    The TS9 connectors are designed to support frequencies ranging from 698 to 4200 MHz. In your specific circumstance, you can connect an antenna to any of the FWA510's external antenna ports.

    Judy

    Untitled Image

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

  • Fadhil
    Fadhil Posts: 18  Freshman Member
    First Comment Friend Collector

    Hi @Zyxel_Judy

    Thank you for your explanation.

    But I have seen in multiple forums that the 4 external antenna connectors are not the same..two of the them for 5G main and 4G main and the other two are for 5G and 4G diversity.

    But no one could confirm which pair is for 4G main and diversity (1 and 2 ? 1and 4?)

    Where port number 1 is at the top and 4 is at the bottom when looking at the router from the back.

    I need your kind help to confirm which pair I plug my ts9 connectors to , to get 4G signal (here we have 4G bands B1 and B3 only if it matters to you when you decide).

    Looking forward for your Reply 😊

  • Fadhil
    Fadhil Posts: 18  Freshman Member
    First Comment Friend Collector

    Hi @Zyxel_Judy

    I wonder whether it is normal or not for Zyxel support employees not to answer their customers .

    I have Zyxel Nebula FWA510 and I asked to which connectors (numbered from 1 to 4 in the included image)should I plug my external antenna cable ts9 ends (only 2 cables) when I am using 4G bands 1 and 3 only (band locking 4G B1 and B3).

    But no one is giving me an answer , whom should I ask if the manufacturer neither mentions that in user guide nor answers you questions ❓

    IMG_20240210_143419_190.jpg

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,204  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security

    Hi @Fadhil

    There is no difference between the connectors; all of them are the same.

    For optimal performance, it is recommended to connect external antennas to all four connectors. This configuration enhances signal strength and overall connectivity.

    Kay

    Untitled Image

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）