How to connect 4G antenna ports in Zyxel FWA510?

Fadhil · February 5

Hello everyone

I am using zyxel fwa510 and living in an area with 4G only ...and the 4G signal is poor.

The router has 4 ts9 external antenna ports and I need your help to choose which pair of ports is for 4G (band 1 2100 mhz and band 3 1800 mhz only are available here).

I am using Kaser V3 antenna with two ts9 ends.

Thank you

themaxlm · February 26

les différentes prises
les sélectionner en conséquence :

Port

ANTO(principal)

Fréquence

703 MHz-4200 MHz

Q⑦

Port

DRX

Fréquence

703 MHz-4200 MHz

Port

MIMO3

Fréquence

1710MHZ-4200MHz

Port

MIMO4

Fréquence

1805MHZ-4200MHz

jeffreychan · March 1

Typically, the ports are labeled with LTE band numbers, and you should choose the ones corresponding to the bands you want to boost. In your case, for 4G with Band 1 (2100 MHz) and Band 3 (1800 MHz), you'll need to connect your Kaser V3 antenna to the ports that support these bands like poly track

tonygibbs16 · March 1

Hello @Fadhil and everyone.

Zyxel say in the following linked post to connect to all 4 but provide more details also:

https://community.zyxel.com/en/discussion/20478/fwa510-external-antenna-conection-do-i-need-to-connect-all-four

If you cannot do all 4, e.g. because the Kaiser v3 has only two connections according to https://www.amazon.co.uk/Omnidirectional-698-2700MHz-Connector-Compatible-Receiving/dp/B08T5YBLZM then might I suggest connecting the top 1 definitely (called Ant0(main) ) and then try the other 3 in turn to see which works the best…

Kind regards,

Tony

How to connect 4G antenna ports in Zyxel FWA510?

All Replies

Categories

Consumer Product Help Center