FWA710 gets no working i-net connection
Dear all,
here is my scenario:
- ZTE MC889, with "Deutsche Telekom" Sim, up and running, all in default
- Zyxel FWA710, with "Deutsche Telekom" Sim, up and running, all in default
- both are connected to a USG cloud gateway ultra
- ZTE to WAN 1 (configured to auto) gets a IPv4
- FWA710 to WAN 2 (configured to auto) gets no IPv4
- i-net traffic via the ZTE is possible, via the FWA710 is not possible.
If I switch from auto to manual on the USG WAN 2 and activate IPv6 I get an IP (v6) but I don't know the prefix
Any advice. I attach some screenshots.
Thanks a lot, Marcus
0
Accepted Solution
-
All, problem solved. By default the first APN setting is configured to IPv6 which doesn't work in Germany. I changed that accordingly to IPv4 with PAP authentication and now everything is fine!
0
All Replies
-
All, problem solved. By default the first APN setting is configured to IPv6 which doesn't work in Germany. I changed that accordingly to IPv4 with PAP authentication and now everything is fine!
0
Categories
- All Categories
- 415 Beta Program
- 2.3K Nebula
- 141 Nebula Ideas
- 94 Nebula Status and Incidents
- 5.5K Security
- 216 USG FLEX H Series
- 262 Security Ideas
- 1.4K Switch
- 71 Switch Ideas
- 1K Wireless
- 39 Wireless Ideas
- 6.3K Consumer Product
- 243 Service & License
- 382 News and Release
- 81 Security Advisories
- 27 Education Center
- 8 [Campaign] Zyxel Network Detective
- 3K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 83 About Community
- 71 Security Highlight