no MLO on 2.4GHz
Freshman Member
I've noticed the following in my WBE660S logs:
Interface: wlan-1-3 MLO disable, reason: Unsupported radio mode option..
I've also noticed that my WiFi 7 clients won't do MLO with the 2.4 GHz band, though it works great for 5 and 6 GHz. I assume from the message that some option I'm using on 2.4 GHz (but not on 5 or 6 GHz) is incompatible with MLO, but I don't know which, and I haven't been able to find any documentation explaining it. Thoughts?
Thanks.
Accepted Solution
-
Hi @BenHead,
This seems like the 2.4G radio mode has been changed to an option that is not 802.11be or auto.
Could you help check this setting and adjust it? If your configuration is correct, could you help enable Zyxel support access so we can check? You may reference this FAQ to enable it.
Zyxel Melen0
Zyxel Employee
All Replies
-
Hi @BenHead,
This seems like the 2.4G radio mode has been changed to an option that is not 802.11be or auto.
Could you help check this setting and adjust it? If your configuration is correct, could you help enable Zyxel support access so we can check? You may reference this FAQ to enable it.
Zyxel Melen0 -
Yes, that was it. It was set to 802.11ax. I switched it to Auto and everything is working as expected now. Thanks!
1
Categories
- All Categories
- 415 Beta Program
- 2.4K Nebula
- 146 Nebula Ideas
- 96 Nebula Status and Incidents
- 5.7K Security
- 262 USG FLEX H Series
- 271 Security Ideas
- 1.4K Switch
- 74 Switch Ideas
- 1.1K Wireless
- 40 Wireless Ideas
- 6.4K Consumer Product
- 249 Service & License
- 387 News and Release
- 84 Security Advisories
- 29 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.5K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 73 Security Highlight
