Skip to content
  • Register

    • Using a Wavlink AP

    Posts: 22  Freshman Member
    First Comment
    in Mobile Broadband

    Have a LTE7490-M904 which works fine. I am now wanting to add a Wavlink AC600 wifi extender configured as an AP. I use an unmanaged switch which seems to work fine. Problem I cannot get the AC600 to access the interent. Have spoken to Wavlink who are useless. The AC600 works fine when connected to another network I have but not the Zyxel mobile phone one. Am I missing something obvious?

    Welcome!

    It looks like you're new here. If you want to get involved, click on this button!
    Sign In
    Register

    All Replies

    • Posts: 373  Master Member
      5 Answers First Comment Friend Collector Fourth Anniversary
      edited December 2024

      You have latest firmware V1.00(ABQY.9)C0 ?

      https://download.zyxel.com/LTE7490-M904/firmware/LTE7490-M904_V1.00(ABQY.9)C0.zip

    • Posts: 22  Freshman Member
      First Comment

      Have now loaded latest firmware but problem still present.

    • Posts: 373  Master Member
      5 Answers First Comment Friend Collector Fourth Anniversary

      You have a POE injector between your switch and AC600?

    • Posts: 22  Freshman Member
      First Comment

      I have attached a drawing of how I have it wired up.

      Schematic.jpg
    • Posts: 373  Master Member
      5 Answers First Comment Friend Collector Fourth Anniversary
      schematic.jpg
    • Posts: 22  Freshman Member
      First Comment

      Hi

      Yes my mistake obviously the LTE uses its 48v psu not 24v as I showed. It does work if I connect a signal from a different router into the switch. That is why I am thinking the LTE is the problem.

    • Posts: 22  Freshman Member
      First Comment

      Have tried various combinations. Different switch, a managed one, no difference. The Wavlink works fine connected into a different router so again finger of blame points to the LTE. Not so much as in its suitability more in as I think a setting is incorrect.

    • Posts: 373  Master Member
      5 Answers First Comment Friend Collector Fourth Anniversary

      Do you use router mode or IP Passthrough?

      If IP Passthrough try router mode, i think that could be your problem.....

    • Posts: 22  Freshman Member
      First Comment

      Set passthrough to off and can now access internet. Strangely I set passthrough to on as with it off originally I could only connect one computer to it any more than one and it threw a wobbly. Will see how it goes.

      Thanks and have a good Christmas and New Year

    Welcome!

    It looks like you're new here. If you want to get involved, click on this button!
    Sign In
    Register

    Welcome!

    It looks like you're new here. If you want to get involved, click on this button!
    Sign In
    Register

    Quick Links

    Categories

    Consumer Product Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）