FWA710 - get information about LTE signal via webapi or ssh

Options
marianob85
marianob85 Posts: 2 image  Freshman Member
First Comment
in Mobile Broadband

Hi,

Is there any possibility to get information about LTE cell info ( RSSI, etc… ) via SSH, SNMP or web api for Zyxel FWA710 ?

Accepted Solution

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,279 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    edited December 2024 Answer ✓

    Hi @marianob85

    Thank you for reaching out!

    Yes, you can obtain LTE cell information (e.g., RSSI) via SSH on the FWA710. Here's how:

    1. Enable SSH access through the web configurator by navigating to Maintenance > Remote Management > MGMT Services and enabling SSH.
    2. Once SSH is enabled, access the device using an SSH client and run the following command to retrieve cell information:
      ZySH> cfg cellwan_status get

    Regarding SNMP, the FWA710 does not support this feature for LTE cell information. Similarly, the Nebula API currently supports monitoring the online/offline status of Nebula mobile router devices but does not provide LTE cell details.

    Let us know if you have any further questions!

    Kay

All Replies

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,279 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    edited December 2024 Answer ✓

    Hi @marianob85

    Thank you for reaching out!

    Yes, you can obtain LTE cell information (e.g., RSSI) via SSH on the FWA710. Here's how:

    1. Enable SSH access through the web configurator by navigating to Maintenance > Remote Management > MGMT Services and enabling SSH.
    2. Once SSH is enabled, access the device using an SSH client and run the following command to retrieve cell information:
      ZySH> cfg cellwan_status get

    Regarding SNMP, the FWA710 does not support this feature for LTE cell information. Similarly, the Nebula API currently supports monitoring the online/offline status of Nebula mobile router devices but does not provide LTE cell details.

    Let us know if you have any further questions!

    Kay

  • marianob85
    marianob85 Posts: 2 image  Freshman Member
    First Comment
    edited December 2024

    Oo. I hadn't thought to look for such information if cfg section.

    Works like a charm. Thanks!

  • Littlebigshorty
    Littlebigshorty Posts: 2 image  Freshman Member
    First Comment

    is there a list of all cli commands for the FWA710 anywhere?

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）