Replace ATP200 with Flex200H

Options
TAPTech
TAPTech Posts: 174  Master Member
First Comment Friend Collector Seventh Anniversary Nebula Gratitude
in USG FLEX H Series

If I replace my Nebula ATP200 firewall with a Flex 200H, will it copy the settings over, or will I need to start from scratch?

All Replies

  • MCFH
    MCFH Posts: 9  Freshman Member
    First Comment Friend Collector Seventh Anniversary

    Check the conversion tool

  • TAPTech
    TAPTech Posts: 174  Master Member
    First Comment Friend Collector Seventh Anniversary Nebula Gratitude

    Thank you for the tip. I checked the conversion tool, however both of the Firewalls are on Nebula. It looks like the conversion tool is only for local/non-cloud.

  • Zyxel_Tina
    Zyxel_Tina Posts: 78  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Network Administrator - Switch 5 Answers First Comment

    Hi @TAPTech,

    Unfortunately, because your ATP200 and USG Flex 200H are managed by Nebula, direct configuration migration using a converter tool is not supported for this specific scenario. You will need to manually reconfigure the settings on your USG Flex 200H. Thank you for your understanding.

    Zyxel Tina

  • TAPTech
    TAPTech Posts: 174  Master Member
    First Comment Friend Collector Seventh Anniversary Nebula Gratitude
    https://community.zyxel.com/en/discussion/comment/78765#Comment_78765

    Hi Tina,

    Here is how I made it a bit easy- created a new Site in Nebula with the USGFlex200H and copied over the settings. Once the settings were complete, I move the switches and access points to the new site, then deleted the old site.

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）