[NEBULA] Setup easy VPN connection to a NSG50

Bram_Lortye · June 2019

Hi there,

Can i find a manual somewhere, how i can setup a NSG50 as a VPN server?

My situation: a NSG50 is in the DMZ of a NAT gateway.

In the NSG50 i made several VLAN, i would like for clients to be able to connect to one of the VLAN with their laptop so they can access local devices (a NAS) in that network.

I was not able to find a quick solotion how i could make this work, if someone could give me a hint :)

gr. Bram

RUnglaube · June 2019

Hi Bram, I guess you need to set up the L2TP VPN, you could check this:

https://businessforum.zyxel.com/discussion/307/how-to-setup-l2tp-vpn-client-connection-with-authentication-server

You could use the cloud authentication for authentication instead of the Radius as explained in the link.

[Deleted User] · June 2019

Hi Bram,

NSG cannot specify VPN role In current stage, however like RUnglaube points out you can still use L2TP over IPsec VPN as the solution.😊

Alfonso · June 2019

HI @Bram_Lortye

I hope this link could help you

https://support.zyxel.eu/hc/en-us/articles/360005482654-Building-up-a-Site-to-Site-VPN-in-Nebula

Regards

Bram_Lortye · June 2019

Hi @Alfonso, thanks for the quick response!

I already saw the link you provided, but that's not what i mean.

As i understand it correct, the tutorial in the link describes how to make the NSG client of another VPN server.

I am looking for the other way around. I want the NSG to be my VPN server, where i can connect to (with windows-native-vpn setup or a client vpn tool or something like that).

In a lot of routers i am familiar with, i can easy setup a VPN server in the router, on the devices you want to connect you simply install a client (exampl. OpenVPN client-app or something like that).

Perhaps i'm looking at it all wrong, i would like to connect (with a windows-laptop/tablet/smartphone) to the LAN network behind the NSG to acces a NAS and other machines.

Perhaps there is not such a functionality (yet) in the NSG's, then i have to find another solution.

Thanks for your time and help.

gr. Bram

RUnglaube · June 2019

Hi Bram, I guess you need to set up the L2TP VPN, you could check this:

https://businessforum.zyxel.com/discussion/307/how-to-setup-l2tp-vpn-client-connection-with-authentication-server

You could use the cloud authentication for authentication instead of the Radius as explained in the link.

[Deleted User] · June 2019

Hi Bram,

NSG cannot specify VPN role In current stage, however like RUnglaube points out you can still use L2TP over IPsec VPN as the solution.😊

Alfonso · June 2019

HI @Bram_Lortye

Obviously it can be done with NSG.

I recommend to configure an IPSEC L2TP server, because most of devices can establish that kind of VPN.

A "how to" can be found at:

https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=016271&lang=EN

Regards

[NEBULA] Setup easy VPN connection to a NSG50

Best Answers

All Replies

Categories

Nebula Tips & Tricks

Nebula Help Center