XGS1930 and MAC filtering on a port

Hi @Venta

MAC filter is a list of MAC that been blocked. It is not an allowed list for switch.

May you share your scenario so we can help to find a solution?

Hi @Venta

For this purpose, you need to configure via device's local GUI since it is not supported on Nebula control center.

Here are the steps:

1. Upgrade your XGS1930 to V5.00 firmware version.
2. Finish other configurations on Nebula first.
3. Access device local GUI to configure port security & Static MAC Forwarding.
   1. Set port security:
      Path: Menu > Security > port security.
      
      1. Activate port security.
      2. Activate port security for specific port(s).
      3. Inactivate address learning.
      4. Limited number of learned MAC address needs to be 0.
   2. Set static MAC forwarding:
      Path: Menu > Switching > Static MAC Forwarding.
      
      1. Click Add/Edit button to add the MAC address.
      2. Enter the MAC address and other value.
      3. Click apply button.

Note:

1. The configuration that edited/configured from device's local GUI will not sync to Nebula.
2. Change configuration on Nebula might cause these configurations been overwritten.
3. Local device's local GUI requires to use your site's local credential. Please reference this FAQ to find it.

Hope this helps.