-
Zyxel NWD7605 on Steam OS ( Steamdeck)
How do I install the driver and use it as a wlan interface? I am not familiar with Linux and I know how to do those steps on windows. It's just I clearly have no idea how to do it on Linux(SteamOS)
-
LTE5398-M904 disable led
it is possible to disable all the leds of the LTE5398-M904, thanks for the help (ita) è possibile disabilitare tutti i led del LTE5398-M904, grazie dell'aiuto
-
NR5103 FIRMWARE ON NR5103E: WOULD IT WORK?
Can anyone confirm if it is possible to load the NR5103 firmware on my NR5103E? Is there any risk of bricking my NR5103E? thank you
-
ZYXEL EX3301-T0 and Asus ZEN MESH
Not sure if this is the right forum as the EX3301 is not listed, however… I am about to move to an ISP that will supply an EX3301, I am currently using the ASUS ZEN AC product can I use the ASUS with the EX3301 as they are both 'MESH' device? Many thanks Phil
-
How can I add another WX3100 to a mesh of already 2
Hello, I have 2 WX3100 ap in a mesh and wanted to add another. However, no matter how I try to do this, via cable or WIFI, the 3rd WX3100 only appears as a separate access point, not part of the web. In the app it is depicted differently. Is it possible to make it part of the mesh? Also, the identification number seems to…
-
Zyxel WX3100-T0 AX1800 Mesh - Backhaul - low transfer
Hello, I bought 2x Zyxel WX3100-T0 AX1800 to create Backhaul Wi-Fi mesh network. I have a ZTE F660 router with GPON to fiber net (400/40 mbit/s) from my internet operator. ZTE should work as a client (I turned the wi-fi off in this device). 1 Zyxel WX3100 is connected by ethernet cable to ZTE and the 2nd Zyxel WX3100 is…
-
NR5103 - External Antennas can be used with 4g or 5g?
Hello i am new owner of the NR5103 i see there are 4 antenna slots on the back, at the moment in my area there is only 4G and i have 2 antennas a poynting xpol 1 4G (2x2) and a poynting xpol 2 5G (2x2) - is it possible to use these antennas on the 4g network without any problems? Thanks
-
Accidentally bricked zyxel 3301 plus how to recover it
Accidentally flashed wrong firmware and wanted to know a way to fix it If someone could guide me it would be a great Thanks
-
NR7101 - Menu-entry for Interface Group is missing
I want to enable IP Passthrough between WAN and LAN (not using WLAN). I get an error message say interfaces have to be in same Interface Group. In manuel a menu item 'Interface Group' exist, but in my web interface such item under Networking does not exist. I'm a bit lost then Peter
-
External device controlled through Zyxel LTE7480-M804
Hei! I need to control remotely a measurement device connected to Zyxel LTE7480-M804 LTE modem. I already have a fixed IP address connection for the modem from my ISP but have been unable to create a connection through the modem to the device. Even the professionals at ISP support couldn't get it working. So how should I…
-
The NR5103E cannot detect the b14 firmware to complete the upgrade
Hi Zyxel Team , The latest b14 firmware was recently released for NR5103E, but I'm still stuck with V1.00(ACBy.0)b12. I noticed that it was possible to manually upload the firmware to complete the upgrade. Could you please give me a backup of the b14 firmware so that I can finish updating the latest system locally? Cheers,…
-
Connecting NR7102 to a switch
Is it possible to connect a NR7102 directly to a switch? If so, which settings are needed on the router? In my case, connecting directly to a PC or access point works (internet is accessible) , but not to a switch.
-
FWA 510 Cellular Lock
Can we hope to have the Cellular Lock option activated in a future firmware release?
-
Convert LTE3301
Hello everyone! How do i stripp and speed up my 3301 router so its only focus on providing internet? I have one more router so i want my 3301 to be at its best to just provide internet👌Pls help a rookie 😅
-
NR5103E - issue with manually setting channel
How can I get the manual channel selection to 'stick'. After changing it from Auto & clicking Apply, it then automatically changes the channel again after a matter of minutes. I want to set the channel manually, as the Auto channel selection keeps selecting channel 36 which is used by Sky & which is the only channel in…
-
Problem with device registration on https://portal.myzyxel.com/
I want to do a registration of our NR7101 device. I'm pretty sure we are using correct mac-address and serial number. But we get an error-message that device can not be found. Is it because we are to late. Device bought from Dustin 8th of August 2021 Peter
-
Force mobile network provider on NR7101
I just installed my NR7101 but have an issue with 5G network selection. I live in Switzerland very close to France and my router keeps switching to a french provider instead of staying on my Swiss provider. Is there a way to assign one specific provider? TThanksfor your help
-
Come impostare l' app manuale?
Sul mio zyxel M904 non riesco ad inserire l'apn in manuale , mi funziona solo se lo imposto in automatico ma io dovrei farlo funzionare con un apn diverso da quello che mi dà in automatico! Qualcuno sa come aiutarmi?
-
NR5103E scheduled reboot option
I have an NR5103E. Sometimes the internet connections turns slow or not responding, and problem can be resolved by simply reboot (using the reboot from admin panel). May I ask is there an option of scheduled reboot? Let say schedule reboot at mid-night everyday. That will make our lives much easier. Thanks.
-
NR7101 connection issues after update module to R13A02
Hi, i've update in DFOTA mode the cellular module but i have some connectivity issues. Before the update, in auto mode, the connection was optimal, but now i must have enabled the PCI 4G LOCK on the b20 band for establish the connection. I've check the connected band and i not see the B7 (i read only the B20, B1, B3 and…