-
How can I change operating WIFI Channel
Hi, I have a general question on my Multy X configuration. In my setup I have a 5,8GHZ radiolink that I am dependent on with regards to internet. My Multy X is operating at Channel 132, and is disturbing the Cambium Radio Link with regards to available channels with low interference, due to DFS and automatic change of…
-
Connect wifi printer to Multy X (without WPS)
Hi. My wifi printer is connected to my router. I want to change it to be connected to my Multy X Wifi, but there's no WPS button on the Multy X units to help me. Could I rename my Multy X units to be the same wifi name as the router? Would that work?
-
Multy X system intermittent drops
Hi - I have a Multy X system (fairly newly installed). Seemed to work fine for a couple of weeks, but has started to intermittently drop the connection. Seems to restore itself after a couple of mins otherwise need to unplug the primary router and then seems to reconnect again. It is feeding off a BT Hub (with the BT hub…
-
Multy X connection issues
I have several devices connected to my Multy X on which I receive "No internet, secured" messages although the devices already connected to the SSID before.Moreover, when I connect these devices to the guest SSID on the Multy X, they connect without an issue. Already restarted both the Multy X and the devices but this did…
-
BlueIris LAN connection
Hi. Bare with me, networking isn't my strong side, so I might have missed something obvious. I'm trying out the Blue Iris (cam nvr) software, and I'm setting up web server. I've port forwarded and can remote access from outside just fine. LAN is a different story. I can access from host computer, but no other devices on…
-
What can be wrong with my Multy Plus?
The backhaul is very unstable. It has been like this from day one, but now it is worse than ever. The backhaul, when it works as expected, gives an average speed down and up at about 550 Mbit/s. The problems sometimes start after a few hour, or a day or two. Satellite starts leaving and reconnects. Speed is decreasing to…
-
Ich muss mein Handy platt machen. Wie kann ich die Multi Accesspoints über Internet bedienen?
Multi #Multy_Aug_2020
-
Speedtest on Multy
My normal speeds test results on my Speedtest app average 600 Mbps download and 94 upload. The multy app used to give the similar speed result. But these days it shows upload of only 2 Mbps when the Speedtest app still shows 94 as upload. Also is cat 8 cable good to use for the Multy x or is cat 7 better ? Please reply…
-
Multy x mesh Speedtest
My normal speeds test results on my Speedtest app average 600 Mbps download and 94 upload. The multy app used to give the similar speed result. But these days it shows upload of only 2 Mbps when the Speedtest app still shows 94 as upload. Also is cat 8 cable good to use for the Multy x or is cat 7 better ? Please reply…
-
Multy U nodes stops working sporadically
Hi. I have three Multy U nodes in daisy chain configuration in my house (topology: ArcherC9 Router->MultyU#1->MultyU#2->MultyU#3, bridged the Multy's). This setup works fine after first setup but within 48 hours the second Multy U node will stop responding (red blink and app says it might not have power). At this point I…
-
Speed test show 0 on upload
Hi, my Multy show zero on speed test on the upload. Using my own Speedtest show good results. I saw that you had same issue in early 2019. #Multy_Aug_2020
-
Error message: multiple wifi detected
I'm trying to setup my Multi X, but when trying to setup the main unit I get the above error message, and setup can't move on. I've switched off all wifi signals at home - neighbors' are still active though. I've tried resetting the unit as the guide suggests. I've reset my network settings on my android, but nothing…
-
Does Multy X have a WPS button?
Because WPS is a less secure method to
establishing wireless connection, Multy
X does not support WPS. Instead, Bluetooth connection is used for setting up the 1st node and the 2nd
node of Multy X with very easy operations.
-
Multy X - In app speed test
Hello, I have a 1000 Mbps connection, and when I test the speed (both wired and wifi) I get somewhat close to this. But when I use the in app speed test, between internet and my router (main router), I never get more than 480-490 Mbps. Is there a cap/limit on the in app speed test at 500 Mbps? #MultyX_Feb_2020
-
Does the multi WSQ50 support MER option 61 login?
Hi, I have been searching for ages and have not found the answer. I have the multi WSQ50 which I used to use as my main router with virgin media (hub in modem mode). I have just moved to a sky broadband area and wish to carry on using the multi. From what I have read I will need a new modem which would then mean the multi…
-
Speed clarifications and settings Multy X
I have a 1 GBPS internet connection... However when doing a Speedtest through the Speedtest application on my iPhone, my average speeds around the house on Wi-Fi is between 200-250 MBPS... present it is all at default settings with daisychain switched on. I want to know if daisy chain is a better option for me when on or…
-
Multy X - Daisy chain config
I understood Multy X didn’t operate as a true mesh network – it used a star configuration in which all nodes talked directly to the router. An update was promised in March that would add support for daisy-chained configurations, has this happened with the new v2 firmware? I’m considering buying a 3 piece system.…
-
Can I use two Multi X on the same system?
Hi - I've seen a great deal on a multi x and multi mini pack, and I was thinking of buying two for my fairly large house with lost of connected devices. My plan was to have one multi x connected to the existing vodafone modem, one multi x next to my TV so the sonos, tv and PS4 can be connected to it via ethernet and use…
-
One of my multi X is giving a strange issue: BLINKING WHITE, RED EXCLAMATION MARK IN APP ETC.
So I have 5 nodes of MULTY X in my house. One of them recently has been showing a RED EXCLAMATION MARK in the app and when I go to it it says: "CHECK POWER CONNECTION THIS MULTY IS OFFLINE" but the power is on! Then the exclamation goes from RED To ORANGE suddenly and the white light starts to blink. WEIRD AGAIN. Wonder…
-
loosing connection multy U
Hi! Have major problems with this mesh. It fails over and over again to have a steady connection with chromecasts and printers. Any ideas? The two chromcast audios i hce connected direct to the hub via ethernet and it works ok, but more problem with the regular chromecasts and epsonprinters. I have 4 multy. regards / Lars…
