-
Zyxel NAS542 - Wake on LAN not working
Hi,My NAS542 does not start on Wake on LAN anymore. It was working on the NAS320 I used previously. The setting for WoL is set. Did something change in the firmware?Thank younpreis #NAS_Jan_2020
-
Rebuilding RAID 5 structure ME -> PANIC
I had problem with my raid disk 3 on NAS542. Decided to update the firmware and to replace the failed HDD. Updated successfully the FW to the latest version. Then replaced the failed drive #3 with a new one. Started rebuilding the RAID 5 structure. At 1.8% the device crashed and I had to reboot. After the reboot the error…
-
How to add a single ext4 formatted HD into an nas542 without reformatting?
Hi all! I have 4 drives that are ext 4 formatted and have some files on them. I have several nas542 systems and in the past I have used empty disks that I formatted and then filled over time. This time I would like to use the existing ext 4 formatted disks as they are, i.e. without formatting them first. Is it possible to…
-
How to change size of LUN
Hi i have setup a iSCSI LUN on my Zyxel NAS. How can i increase that LUN if i need more space?
-
Expanding RAID volume on NAS326 is not working
My NAS326 had previously two 1.5TB disks on RAID 1. After one them busted, I decided to replace them both with 2TB WD Red disks. I first replaced the broken disk, and then repaired the RAID volume. I then replaced the other disk, and repaired the volume again. I now had fully functioning 1.5TB RAID 1 volume on 2TB disks.…
-
NAS326, auto execute command at startup
Hi all, I would like my NAS326 to execute some (simple) commands at startup, but I would prefere to keep NAS' software untouched; in other words, I would prefere not to install Tweaks/Random Tools. "Since those packages exist, the standard f/w already provides a way to execute something at startup", I guess. Assuming I'm…
-
Programme auf dem Nas
Hallo Gemeinde Ich habe den NAS 326 und habe mal eine frage. Auf dem nas sind ja einige Apps vorinstalliert drauf Z.B Transmission 2.84. Wie kann ich den auf die neueste Version updaten. Es gibt ja schon die 3.0 Version von Transmission. Vielen dank im Voraus Yakum
-
Upgrade NAS540 from 2x1TB single volumes (no raid), to 4x2TB raid5
I am looking to upgrade the disks in my NAS540. It is currently occupide by 2x1TB drvies as two single volumes (no raid). I want to build a raid5 volume out of four new 2TB disks. How would I go about doing this? I had a plan to remove the two current disks, insert the new disks to build the new volume, and then using an…
-
Persist a chron job
Hi guys Got a bit of problem with a NAS326 I'm trying to create a persistent root chron job. I only found out recently that the Zyxel upon rebooting refreshes/reloads the OS and overwrites some (or all) files such as crontab. I think I managed to follow along with most of what was explained in another…
-
NAS540 hardware failure, restore process in new unit
The NAS540 won't power on anymore, we have replaced the power supply and it is still broke. Support indicated that means a hardware failure within the unit and to "copy" everything to another drive. I have 4 4tb drives in raid 5 in the old unit. What is the process to move the drives from the old unit to the new nas540…
-
The MySQL server of the NAS326 app runs only on localhost, how do I make it LAN reachable?
Hello, everyone! I've been trying to configure the MySQL app for my NAS326 for a solid day now and it's getting a little frustrating, so here I am! I need to configure the server so that it accepts requests from the whole local network as opposed to the default localhost option (since the local host is the NAS itself as…
-
NSA310 - External Drive Size limit??
Hi Folks Just upgraded my NSA310 with a new drive, and was going to use the old one as a eSATA drive. But it does not want to see it, tried creating it as NTFS and it says failed. The drive is being seen as I can see it with the SMART as it is listed (and front light says connected), but unable to create a volume etc. (I…
-
Strange user and error while deleting the file "there was a problem with the network"
Recently noticed that when deleting any file from any directory I get an error (no number) There was a problem with the network. Used android application solid explorer. At first I dropped everything on the application itself, but then I checked it on another ftp and everything is fine there. The error is reproduced both…
-
Encrypted / Blockchain Personal Cloud on my NAS 326
Hi everyone! I've looked at a few different solutions, but I don't feel safe with Google Drive, Dropbox or any other of the big dragons. Finally I found an alternativ called JS Security. It's almost working as the DrFTPD back in the day, but it encrypts the data and distributes the files between the nodes and throws away…
-
Zyxel Drive app hung on “connecting”
NAS326. Paired in Zyxel Cloud and I can use http or https over WebDAV to connect remotely from my laptop. So far so good. But in the iPhone Zyxel Drive app - it lists my NAS but then the icon blinks and it says “connecting” and that’s it never progresses any further. Think I’m missing something. Are there any other…
-
NSA320 RAID 0 JBOD how to restore files from HDD
Hi there, I look for help. I didn't see answer, so I put question here. I've got 2 WD disk - They are in GREAT condition as I think after 12 years :) NAS was mostly turn off, and was only for old pictures storage. Last day, I can't see the FOLDERS when I connect via NAS starter utilitty. I get them out of NAS, and try to…
-
ZyXEL Drive hangs, group rights lost and admin rights given to cloud user
Set up my NAS 326 with accounts admin, a local user and a cloud user. Cloud user got group "admin" upon creation but I removed it and set read/write for group "groupA" instead. groupA has read/write for shareA. When logging in via ZyXEL drive, i start to see the folders accessible by groupA, but when swiping to update the…
-
NAS326 not accessible from vpn client
Hello, our NAS326 is up and running in our house and can be accessed via web browser. We have configured a VPN server using our router and we can access all other devices from our local network (192.168.1.0/24 ) however when we try to access our NAS326 ( 192.168.1.3 ) from a VPN client ( 192.168.8.3 ) the connection does…
-
Dropbox agent not synchronizing
Hello, I had it working in May 2021. Now it is not synchronizing. I have a Dropbox Basic Plan. I have the latest firmware version. The configuration I think it is correct, and it appears as authorized in Dropbox. Dropbox Client is updated to its latest version 6.7.0zypkg002. The status in the Dropbox Client is "Enabled -…
-
Need: Zyxel Rescue Stick NAS542
Hello Community, I had the Rescue Stick for the NAS540. Just need the right one for the NAS542 Can someone help me?
