-
Flex 200H - Dual partitions for upgrade
Hello everyone, I needed to upgrade this firewall remotely: And everything was OK: But I see only one partition available for firmware test. Wouldn't it be better to always have the double partition available? An easy way to have also the "Standby" one instead of only "Running" one like I have on all other Flex/ATP series?…
-
Flex 200H - Time needed for reboot to regain contact with Nebula
Hello everyone, I updated to a custom firmware the 200H to check a software upgrade, so I was able to reboot it manually via Nebula Configurator. Well done. My question is related to time needed for reboot, is it normal to see the firewall offline for about 12-14 minutes? Thanks a lot
-
linux client ssl vpn
Hallo, Is it possible to make atp 200 firewall ssl vpn from Linux client? Is there an agent or configuration file available? Thanks.
-
Buying an SCR50 AXE
Can the SCR50 AXE also be purchased and used by private persons or is this device reserved for company customers only?
-
VPN stopped working
VPN300 V5.37(ABFC.0) So today I found out my VPN link was down so on my Flex200 I tried disable and enable the rule no help over to VPN300 I disable and enable now its up and running again not sure if it will happen again.
-
USG Flex 700 5.39 (ABWD.0)
Installed yesterday newest update 5.39 (ABWD.0) but SSL VPN connection does not work any more. SecuExtender gives error Code 9: No answer from Gateway. Someone else with same issue? Thanks in advance
-
Flex200 doing lots of trace route by itself
USG FLEX 200 V5.38(ABUI.0) So I have a way of allowing USG to connect to its servers by VLAN443 and I allow it to route for HTTPS looking at Wireshark for all my taffic I was seeing some ping requests I tracked it down to the Flex200 and see I was blocking port 4335 so I routed that down VLAN443 and it connects fine looks…
-
WBE530 (Wifi 7 AP) management with APT AP Management
hello on the website of the wbe530 it is described that the access point can be managed via a local controller (https://www.zyxel.com/global/en/products/wireless/be11000-wifi-7-triple-radio-nebulaflex-pro-access-point-wbe530) on a current ATP 500 5.38(ABFU.0) / AP Firmware V7.00 Patch 2 I cannot find this accesspoint in…
-
USG FLEX 500 - Internet with fixed IP does not work.
Hello, we are facing a problem with the USG FLEX 500, where we have an internet link with a fixed IP that does not work on this firewall. It is not possible to access the internet, not even to ping the internet link gateway. However, when testing this same link with the same fixed IP settings on any other device, the…
-
USG Flex 200H - Priority for autoupdate
Hello everyone, I updated to 1.21 firmware and I see that there is a specific area where to set the autoupdate for the firewall in "on-premise" mode: I see also similar section inside Nebula: Which is the right moment when the firewall autoupdate itself? Everyday at 06.00 or on Monday at 02.00 ? If I switch off green…
-
USG20-VPN low internet LAN speed comparing to WAN
Hi. I'm experiencing a strange issue with that FW. The internet connection speed took from Fiber line router is about 850 Mbit/sec (1Gbit contract). Looking at the FW control panel, the LAN1 connection is regularly negotiated at 1000M (1Gbit) but the internet speed is capped at 400/420 Mbit. No way to get the 850 that…
-
Configuration files and license in SecuExtender for MacOS
Hi all. I just wanted to make a backup of my connections configuration and license info for SecuExtender for MacOS. Where are they stored? If I edit connections I can see name and IP, but no credentials, and "About" says that license is registered with no other infos. Where are they stored? Thank you in advance
-
port forwardinfg not work?
i have set NAT and policy access in Zyxel USG110 SYNNAS is snology which has started DDNS function,that mean port of NAS has been opened. however, result of https://www.yougetsignal.com/tools/open-ports/ is Port 5001 is closed on your IP… I have ref this youtube already, but seem failed:…
-
Zyxel USG Flex 100AX - problem with internet via Wi-Fi
Hello, I have a problem with accessing the internet via Wi-Fi connection to the Zyxel USG Flex 100AX device. Fresh installation. when I connect to it wirelessly, I constantly have no access to the internet even though the connection with network seems to be ok. Restarting the WiFi on my macbook temporarily solves the…
-
SCR 50AXE - Firewall rules for vlan segmentation not working
Hi, I`m trying to segment my vlans on a SCR 50AXE. I can configure the firewall rules as per the Zyxel documentation, configuration gets pushed to the device (at least the GUI says it), but traffic is not filtered. Also I cannot see any security gateway logs for the device in the dashboard. 🤔 Vlan information gets pushed…
-
SCR50 AXE
Hi, I would like to know why my wan is rest to DHCP sometimes, perhaps when the firmware is updated. I use external acces and need a fix IP from my box to the router, otherwise I have no external acces. Any solution? Thank's Yves
-
Two wan side vpn
So far I had a L2TP VPN on my Wan side. A new Internet connection was connected to the Wan3 interface. I want to solve the IPSec IKEv2 vpn on this. I did it, but is there a way that the vpn connection can't work at the same time? The vpn receives IP addresses from different domains. I would like to ask for help with this…
-
How to use ATP800 BLOCK SYN packet
How to use ATP800 BLOCK SYN packet
-
Problem chain certificate SSL in 2fa link url address
Hi, problem in my firewall USG Flex 200 V5.38(ABUI.0) : I created a csr certificate from "my certificates" and I purchased the certificate from Sectigo. I was able to import the certificate received as well as the 3 certificates in "trusted certificates" I can see validation successful in "my certificate" when I double…
-
USG Flex 100AX - port lan is down
Hello, I have a problem with the Zyxel USG Flex 100AX hardware firewall. The logs show "Port 3 is down!" once an hour, then after 10 seconds "Port 3 is up!". I have a Ubiqiti U6-LR access point connected to port 3. Both devices are new. The hardware firewall has been updated to the latest versions - V5.38(ACFN.0), Ubiqiti…
