-
Charlene Mafirakureva
how do i disconnect other devices from my wifi .or rather how do i change the password
-
XGS3700-48 archived firmware 4.20
We are moving some older XGS3700-48 switches from production to DR and wish to upgrade from firmware 4.10 to the latest, 4.30. It seems that 4.20 must be installed first and I can't locate it for download. Thoughts?
-
Setup ES-2108 Tunking ports
Hi, i try to setup the switch whit two uplink port1 (vlan1) and port10 (vlan10). all other port need to be trunk port so i can connect and setup on client or router the VLAN ID of the other end . Thx for help
-
No management traffic/DHCP from upstream firewall/router to three GS1900 switches over PVID 1
I have two GS1900-24E and one GS1900-24 switches connected to the three internal ports on my Firewalla Gold Plus router/firewall. I created 6 VLANs with DHCP support from the Firewalla connected to port 24 on each switch and they all work as expected. However, I seem to have inconsistent functionality on the uplink/trunk…
-
GS1920-24HP cihazımın firmware güncellemesi yardımı
Merhabalar kolay gelsin kullanmış olduğum Device Type GS1920-24HP Boot Version V1.00 | 03/21/2014 Firmware Version V4.30(AAOC.0) | 09/16/2015 cihazımın firmware güncellemesini yapmak istiyorum. Bu konu ile alakalı yardımcı olabilir misiniz.?
-
AV Over IP configuration
Hi, do your XS1930 Series switches support AV over IP functionality? Specifically the XS1930-12HP we are looking at installing 4, 10G Multicast UHD Video Transceivers, the manufacturer currently only officially supports Netgear. Many thanks
-
HELP !!! for manage Switch GS1920-24v2
Hello everybody, I have two ZYXEL GS1920-24v2 switches connected together by a pair of fiber on SFP port No. 27 Example: I want to plug something into port 3 of switch 1 and recover the flow on port 3 of switch 2 by isolating them from the other ports. and use the same way for the other ports: port 4 of switch 1 to port 4…
-
Port Issue
I have a GS1920HP switch that has been working very well for a number of years. Yesterday and out of the blue I lost connection to two APs which the switch was powering. On the system log I get this sort of message: 5 Jan 01 04:24:00 DE interface: Port 37 link down 6 Jan 01 04:23:35 DE interface: Port 37 link up 7 Jan 01…
-
Own certificate on GS1920 or GS1900-10HP
I have 2 GS1920-24 switches and one GS1900-10HP. I would like to install own certificates on these as HTS is enabled on the domain under which these switches reside. How can I install my own certificates so I don't get locked out as the default self signed certificates are not accepted? Thanks Louis
-
XGS1250-12 Warranty
How does one get warranty service on a XGS1250-12? The phone number listed on the warranty page doesn't response to key presses and then hangs up. The warranty@zyxel.com bounces.
-
GS1900-24E 2.70, 2.80 - Javascript Error
Hi, with both firmware versions I see Javascript errors in Firefox 122 and Safari 17.3 after login on "dispatcher.cgi?cmd=1" page. This breaks most sidebar options. The main error is: "Uncaught SyntaxError: unterminated regular expression literal" line 124 at "if (z[i].name.match(fname) != null && parseInt(z[i].value) ==…
-
Can't register or update GS1920-24 (v1?)
I have a gs1920-24, not the v2 version, the v1, its really hard to find information and for now I haven't been able to find a newer firmware version than the one its running: System Name gs1920 Product Model GS1920-24 ZyNOS F/W Version V4.10(AAOB.4) | 09/16/2014 Ethernet Address 4c:9e:ff:7d:30:57 I also get this in…
-
GS1200-8 managed switch with Ubiquiti AP
I was trying to connect my gs1200 switch with ubiquiti access point to have multiple SSID. I have 4 VLANs created with tag 10, 20, 30, & 40. My 1st port is LAN from pfsense connected to switch. I have set Link aggregation on Port 7 & 8 in the switch and 2 ports on the pfsense router. I have connected both port 7 & 8 to my…
-
GS1920-24HP Firmware Update
Hi I have a GS1920-24HP which is currently running V4.30(AAOC.0) | 09/16/2015 I know its EOL but I think the last firmware was V4.50 and I can't find the device listed on just GS1900-24HP with firmware 2.70. Can you point me to the correct place?
-
Zyxel mes 3528
Здравейте! Незнам дали тук трябва да пиша и ако не се извинявам. От къде мога да получа фърмуер за Zyxel mes 3528
-
SFP Modules
As one of my switches seems to have developed a fault I am looking at adding a fiber uplink to a new Zyxel switch in order to spread the load on two switches. The present switch is a GS1920HP 48 port and I would like to ad an XGS1930 through a fiber connection. Is there a published list of compatible SFP modules that work…
-
GS1100-16 switch off EEE?
Is it possible to switch EEE off in the GS1100-16? I intend to use it for Dante, however the GS1100-16 is on Audinate’s Dante incompatibility list because of EEE. I’m hoping it can be disabled via a dip switch or jumper on the pcb.
-
Stuck with Vendor-ID-based-VLAN
I think what I am trying to do is not too complicated but I am stuck at a 90% mark I want to have ports splitting what comes in on its ports from the default VLAN 1 (which has a DHCP server) to VLAN 400 based on the Vendor Mac. From the MAC tables, I have what appears to work but there is no communication between devices…
-
GS1350- CLV not working
I have a new to me GS1350-6HP. Its running the latet 4.70 firmware as far as I can tell. Finding it very difficult to get the vlans doing what I want and am at the CLI trying to enable CLV mode (I am very familiar with cisco switches). The CLI guide for the 1350 says I should be able to enable, config, clv to enter clv…
-
XGS1930-52HP SNMP oids for defining PoE consumption on port
Hi, can anyone share the information about SNMP oids to show PoE consumption on ports for XGS1930-52HP? I`m looking for something, looks like CLI answer on request "show pwr": or WebUI: I know about 1.3.6.1.2.1.105. but this branch does not have an oid with ports PoE 'Consumption (W)'. Q: How I can get the PoE consumption…