-
Question about setup GS1200-8HP v2 with NWA50AX behind a FRITZ!Box 7590
Native language: German / Question in German below. Hello all,please excuse my english. I have been a satisfied user of the GS1200 desktop switches for many months. Now I am at a point where I need help before I buy more components. Situation / Introduction: There is a FRITZ!Box 7590, which realizes the access to the…
-
How do I add 2.4 G
I need to login to my account to change my speed.
-
MAC Filter on NWA50AX as Root/Repeater
Greetings,I set up a wifi network with 2 NWA50AX configured as root and repeater. Now I would like to use a MAC filter list. I created a list of MAC adresses that should be allowed to access the SSID. When I use and activate this filter list on both APs no device is allowed to access the SSID.What is the recommende…
-
[Video Demo] How to Configure Zyxel Access Point with Local Web Interface
Zyxel access points can be managed either in standalone mode or in Nebula cloud-managed mode. Users can configure the device using its local web interface. This video will show you how to get your access point setup via the device’s local web interface: https://www.youtube.com/watch?v=g8IBHNHVUMY&t=36s
-
VLAN not working in my home network
This discussion was created from comments split from: Networking issue with Zyxel WLAN Controller and VLANs.
-
Which AP for my UAG2100 Controler ?
Good day, I need to expand my wifi network, I have a UAG2100 with 3 AP NWA5123-AC model.My question is which actual model of AP is suitable to my UAG2100 ?Can I put an PoE switch in order to supply the new AP ?Thanks a lot
-
3x NWA50AX V6.25(ABTF.5), standalone APs: Where is 802.11r ? And: (faster) dynamic routing
Hello, I'm using 3 NWA50AX V6.25(ABTF.5) as standalone APs with same SSID throughout my house. Due to obvious reasons WDS isn't appropriate with these two band APs and I don't want to let the APs to be controlled externally (e.g., NCC) Where is option 802.11r for fast roaming in standalone mode? This seemed to be supported…
-
NWA210AX firmware update advice
I have a NWA210AX with back level firmware. The download page has three versions available (all newer than mine). Can I install just the latest version or should I install the three versions sequentially?
-
how do i access NWA3560-n GUI ?
i have a NWA3560-n and it seems to have FTP, SSH, HTTP and HTTPS open but i cant connect to it ..FTP and SSH just gives me a command promt and http and https does nothing.. i have it connected to my local router so it gets a DHCP address and thats about it .. NO wifi is enabled on the NWA3560-n so i cant access it that way…
-
NWA 1123AC - Unregistring the product
Hi, I the Lecturer at a Vocational Scholl in Denmark and
we bought 10 AP's for educational purposes. Former students have registered 3
of this AP's and how do I unregister the AP's again and release them from ZyXEL cloud solution? BR Steffen
-
Reinit due to HW stuck WAC6303D-S NXC2500
We have 10 WAC6303D-S AP's and a NXC2500. The log of one WAC6303D-S frequently shows the message (not an error) "Reinit due to HW stuck". I cannot find anything about the background of this, but it does not sound OK. We also have stability issues in the surroundings of this AP. Does anyone know more about this message?
-
NWA50AX adding printer
Installed my NWA50AX into my outhouse office. Perfect connect to all devices apart from my printer. Is there anyway to active WPS with it? I don’t have a cable for the printer to assist with setup.
-
Client hand-over on multiple APs
Sorry in case this topic has been already discussed. In that case a link to that thread would be highly apprecated. In our case (small company) we got an USG110 running where only one WLAN AP of type WAC6103D-I is connected to. The USG is acting as the controller for it and all is running properly. Now we rent an…
-
WAC6103d-i
My two WAC6103d-i wlan devices operating in AP mode only show a TX/RX Rate of max 54 mbit on both 2.4 (n) and 5 GHz (ac) band. Speedtests show about 25Mbit throughput only. I do not seem to be able to influence this. According to the device specification the speed should be much higher. Anyone any ideas ? i am using an…
-
CWMP ConnectionRequest 404 Not Found
Hi we have a few DEL1201-T10A devices in our private acs network , we tried to enable cwmp in device and it's connected and informed successfully . but if we tried to connect device on connectionRequest URL + connectionRequest Path , we got 404 not found error . is there any special action to make HTTP request to…
-
NWA210AX - Automatic SSH login from Openhab
Hi, i need autoconnect from Openhab to Zyxel AP, to turn on-off the wifi. I'm able to turn on-off the wifi manually with a ssh connection from my Macbook. But i'm not able from Openhab because i need to write it in a single command line like that: ssh2 -p PASSWORD USER@ZYXEL_IP /configure terminal/wlan slot1/no activate…
-
NWA50AX V6.25(ABTF.5): Where is 80 MHz @ ch132–144 and UNII-3:ch149–161?
Hello, why is the 80 MHz channel block from ch132–144 not available? This is just intangible to cut off UNII-2-Ex at ch128. What's wrong with this device? Well, and of course, where's the 80 MHz band of UNII-3:ch149–161? Btw, we're in the EU (Germany) here and I never had any radar/DFS issues (or messages about detection).…
-
Wifi 6 Release 2
With the announcement of the WiFi 6 Release 2 standard at CES......... Does the current slew of APs already support Release 2 with a software update? Namely for me the NWA210AX?
-
We have a group of 3 AP's. One is an NWA5123ACHD that is operating in limited power mode.
What can be done to correct this.
-
Firmware for UAG5100
Hello, iam searching for a new firmware for an UAG5100. Unfortunately i can't find any firmware for the UAG5100 on zyxel website: https://www.zyxel.com/de/de/products_services/Unified-Access-Gateway-UAG5100/downloads Where can i find a new firmware? Current firmware is V4.18(AAPN.0) / 2017-04-19 16:54:49 In the…