-
What is the maximum number of connected nodes supported by the Multy U system
What is the maximum number of connected nodes supported by the Multy U system?
-
Anyone have performance issues with a NWA1123AC HD
I purchased the AP to replace a Asus router but am getting worse performance from the AP. Ran speed tests from the port the AP is plugged into using the same cable that was connected to the access point got 340Mbps on speedtest.net and fast.com. Getting 310 from the asus router. Max I can get from The zyxel is 200Mbps, my…
-
WAC6103D-I controlled by ZYWALL 310 randomly disconnects all clients
We have an installation with 8 AP WAC6103D-I controlled by Zywall 310. Randomly all clients connected to one AP loses connectivity to network. They are still connected to WiFi but they have no LAN/Internet connectivity. After a few seconds 15-20 sec it works fine again. It is not problem of a one AP. The same situation…
-
Bitte Unterstützung mit NAS 326
Hallo Forum, ich bin ebenso neu, wie derdiedas NAS326, derdiedas heute gekommen ist. Ich habe zwei normale WD-HDDs IM Gerät und zwei HDDs über den USB 3.0-Anschluss angeschlossen. Ich würde mich freuen, wenn mir jemand einige Fragen beantworten könnte. - Gerne möchte ich Musikdateien von den ext. HDDs auf die internen HDDs…
-
mac-address table on NWA1123-Acv2 with SNMP
Hello, I'm using the latest firmware (6.0) on my NWA1123-Acv2, and based on the ZYXEL-ES-WIRELESS.MIB attached, the OID to get the mac-address table of the devices connected should be 1.3.6.1.4.1.890.1.15.3.5.2.1.3. This MIB doesn't look updated with the firmware revision (the "wlan station" table doesn't include the tcp…
-
Aktivierung GastWLAN in NWA1123-AC PRO per NCC
Hallo ZyXel Freunde, ich habe drei
NWA1123-AC PRO im Einsatz. Alle drei sind per LAN über einen
GS1920-8HP und GS1900-24HP mit meiner FB 7490 verbunden. Auf der FB 7490 habe
ich zwei WLAN eingerichtet, mit zwei verschiedenen Namen. Die NWA1123-AC PRO
und den GS1920-8HP manage ich über NCC und den GS1900-24HP manage
ich…
-
Zyair g-220 driver per windows 10
hello, i need the driver for Zyair G-220 to be able to use it in windows 10. Does it even exist? thank you
-
Ständige Abbrüche beim Bewegen
Hi! Einer meiner Kunden hat einige Probleme mit einer USG60W und zwei WAC6103D-I. Er beschwert sich darüber, dass Clients, die sich innerhalb des Büros bewegen, ständig Abbrüche haben, das Internet ist "hakkelig". Irgendjemand eine Idee? Danke im voraus! Gruß TempTemp
-
NWA5123-NI kann sich nicht am AC des USG60w registrieren
Hallo, ich habe folgendes Problem: Ich sehe den AP zwar im AP Management des USG, er wurde auch automatisch auf die neueste Firmware aktualisiert, er wird aber immer als offline angezeigt und funktioniert somit auch nicht. Im Webinterface des APs wird er als standalone angezeigt. Mehrere Reboots und Resets haben nicht…
-
I'm having troubel keeping an iPhone conntected to the internet.
I have to keep deleting history and website data in Safari on my iPhone to connect to any website on the internet. I have updated my phone and checked the firmware on the nwa 3160. All are at the latest versions. Is there a setting that I'm missing on the access point?If I go to another location different brand access…
-
Re-registering NWA1123-ACv2
I am using the nebula app on android. I want to register two NWA1123 on my site. The devices are already registered by the previous owner. I scanned the QR code from the box and normaly the app shoud unregister the device and re-register it under my organization. But it does not work. After I press done there is a message…
-
HTTP command execution support
Hello, I'm currently working for a networking company that uses your router model PMG5622GA to set up wifi networks using optical fiber. I'm a Java developer, and I would like to know if your routers offer some kind of HTTP support to stablish connection through a java aplicattion and execute admin tasks like changing…
-
CLi command
Hi there, I'd like to add / remove some clients from our MAC filter profile. Can do that via WEB gui, but I was unable to find commands for CLI... * wlan-macfilter-profile "profile name" But how to add/remove any entry(entries) from this LIST via CLI ?? Thanks a lot.
-
What do you need to configure so that your connection switches over to the stronger AP?
Thanks for all your help so far, how do i configure the controller to switch to the other AP that has higher signal strength? right now it is holding onto the other AP that has lower signal strength.
-
Zyxel NXC2500 – problems with more than 2 APs
Hi, I have recently started getting problems
with operating more than 2 APs in my network. I’ve got Zyxel NXC2500 as AP
controller, Zyxel GS1900-8HP PoE switch, and 3 Zyxel WAC6103D-I Access Points
connected to the switch. The problem is that only 2 AP can work at the same
time. When all 3 of them are connected to the…
-
Securing an outdoor AP
Hi, I have a USG60W along with a GS1920-24 and some NWA5123-AC (plugged into the switch), now I also got an Outdoor AP Enclosure in order to bring my Wifi into the garden (what works fine using 2 vlan-based SSIDs for internals and guests). But I am a little bit worried about security (someone unplugging the AP and…
-
Securing an outdoor AP
Hi, I have a USG60W along with a GS1920-24 and some NWA5123-AC (plugged into the switch), now I also got an Outdoor AP Enclosure in order to bring my Wifi into the garden (what works fine using 2 vlan-based SSIDs for internals and guests). But I am a little bit worried about security and tried so setup port auth/security…
-
Old SSID's showing up after the AP is now controlled
Ok, I have three AP's that used to be controlled manually and setup with unique SSID's on each AP. Once i connected the NCX2500 it took over managing the AP's (which is what i want). I have configured the AP's in the controller to have multiple SSID's on each AP again which is what i want. But I am still seeing some of the…
-
habe neben einem NWA1123-AC HD keine Verbindung mehr zum Internet
Guten Tag, ich habe nun schon seit Monaten das Problem, das ich neben einem meiner 2 NWA1123-AC HD auf dem Smartphone ( Androide 10 ) oder dem IPad ( Ios ) im 2,4 Ghz netz ohne andere Störquellen keine Verbindung über 10-15 Sek bekomme. das Internet hat keine Störung da alle Geräte über Lan ohne Probleme ihre Arbeit…
-
VPN100 managed AP's rebooting almost every day
Hi all I'm running two WAC6503D-S on a VPN100. They rebbot randomly, almost every day. WAC6503D-S are on FW V5.40 Patch 2 VPN100 are on FW V4.35(ABFV.3) / 2020-02-26 11:27:47 Thank You for any help, Dany
