Your ideas could be new features for Wireless!
Hi All, I can't upgrade my NWA5123-NI of firmware from V4.30(AAHY.0) to 5.10(AAHY.2)C0! How can I do? This AP of boot module is v1.19! thanks! #Biz_WLAN_October
Hello what are the differences between NWA1123-AC & NWA1123-ACv2 ? regards #Biz_WLAN_October
HelloOur system has worked well with NXC2500 and 20 NWA5123-AC. But now we have problems with internet access to mobile phones, both iphone and androids.Suddenly the connection will not work, the browser stops. If I then switch to another SSID, it will work again. (We have three different wlan with different SSID.) Anyone…
Hi all. To a customer I have to do a wireless installation with 8 NWA5123-AC-EU0101F. As "Access Point Controller" I just need his Zyxel USG110, or I have to use specific products?
Hi there, the default license of our N4100 Hotspot Gateway allows a maximum of 100 "subscribers" with the gateway's built-in authentication enabled, meaning a maximum of 100 devices connected with the gateway at the same time. Will the maximum number of clients still be limited to 100 when we disable the built-in…
I want to set up the 802.1x security profile with AD server authentication, but it didn't work after I set up. After I changed the "Radius Server Type" to internal, it worked correctly. What's the difference between internal and external? If I used an external server for authentication, it should be selected to "external",…
Hi Everyone, I'm trying to connect WiFi in a scenario where one AP is Root AP and other 3 APs are repeater AP. All APs are NWA1123-ACv2. We have done the configuration that created WDS profile on Root AP and repeater AP but WDS link is not coming up. Please kindly help check if any changes required.
Hello, i hope you understand my bad english, i am from Germany :-) I want to configure an NWA 5123-AC with my UAG 4100. I connected my Laptop with the NWA and set an IP Adress to the NWA. Then i put the NWA into the UAG and want to configure the NWA AP. But this is my Problem. What do i have to do now? Can you help me…
I use some APs for my guests to connect and L2 isolation to avoid they can connect to each other when they come to my office. Recently, I changed my configuration to add captive portal and redirect them for using a QR code to access internet. But, after I doing the captive portal setting, the L2 isolation is not working.…
It looks like you're new here. Sign in or register to get started.