NAS326 RAID

Options

NAS326

NAS326 Posts: 6

Freshman Member

August 2019 edited August 2019 in Personal Cloud Storage

Hi all,

I have a question related to RAID 1 on my NAS326.
I had initially one HDD and after 3 months of usage I have added the second one. I've sync them on RAID 1 but in Overview, Volume on RAID is see "No Volume".
But in HDD section i see both hard drives and says "Disc Group 1 (raid 1).

See the below image.

My question is, do I have the HDD in RAID 1 or not? Why does it says No Volume on RAID?

Image: https://us.v-cdn.net/6029482/uploads/editor/35/6os117ypz9dh.png

#NAS_Aug_2019

0

Accepted Solution

Mihawk Posts: 103 Ally Member

August 2019 Answer ✓

It is normal, because you're used disk group to create the volume.

So, you need go to Disk Group to check its RAID Type.

Also, you can see it on Hard Disk.

Here is the description of user's guide about internal storage.
https://www.zyxel.com/support/download_landing/product/nas326_22.shtml?c=gb&l=en&pid=20150327120001&tab=User_s_Guide&pname=NAS326

0

All Replies

Mihawk Posts: 103 Ally Member

August 2019 Answer ✓

It is normal, because you're used disk group to create the volume.

So, you need go to Disk Group to check its RAID Type.

Also, you can see it on Hard Disk.

Here is the description of user's guide about internal storage.
https://www.zyxel.com/support/download_landing/product/nas326_22.shtml?c=gb&l=en&pid=20150327120001&tab=User_s_Guide&pname=NAS326

0
NAS326 Posts: 6 Freshman Member

August 2019

Thank you!

0

Consumer Product Help Center

FAQ

EnglishTiếng ViệtРусскийไทย中文（台灣）