NAS firmware upgrade seems stuck
Options
michaeljc70
Posts: 11 Freshman Member
I attempted to do a firmware upgrade of my NAS326 through the interface. It has been stuck at 10% for 30 minutes. Everywhere it says not to reset during a firmware upgrade. How long do I wait? Is it going to be hosed if I reboot it?
Edit: I can still access the files on the NAS through my laptop.
#NAS_Mar_2020
Edit: I can still access the files on the NAS through my laptop.
#NAS_Mar_2020
0
Accepted Solution
-
I let it sit all day. I couldn't log into the web interface (message was something like a firmware update was in progress. I had to reboot the NAS. Luckily I was then able to complete the firmware update and it seems fine.0
All Replies
-
I let it sit all day. I couldn't log into the web interface (message was something like a firmware update was in progress. I had to reboot the NAS. Luckily I was then able to complete the firmware update and it seems fine.0
-
same here. Reset doesn't work. How do you reboot? Just unplug the power?0
-
ok, i've turn it off and turn it on again. No firmware update but it's working again.0
Categories
- All Categories
- 397 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 89 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 918 WirelessLAN
- 35 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 920 Nebula FAQ
- 422 Security FAQ
- 237 Switch FAQ
- 208 WirelessLAN FAQ
- 47 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight