2 ethernet ports on Nas 520?

atoposatopos Member Posts: 2  Freshman Member
edited May 28, 2020 6:57AM in Personal Cloud Storage
Hello,
I am trying to connect 2 pc's through ethernet on the 520,
both ports work fine on the 520(gigabit speed-orange led) but as soon as I connect the second port I do not have access to my files?

P.s I find it hard to believe that the 2 ethernet inputs are only for aggregated link..?
When connected to a 4 port 10/100 switch that I had laying around both pc worked fine but really slow. 

Accepted Solution

  • MijzelfMijzelf Member Posts: 1,498  Guru Member
    Accepted Answer
    Lan1:
    IP->192.168.10.1
    Netmask->255.255.255.0
    Pc1:
    IP->192.168.10.2
    Netmask->255.255.255.0

    Lan2:
    IP->192.168.11.1
    Netmask->255.255.255.0
    Pc2:
    IP->192.168.11.2
    Netmask->255.255.255.0

    Gateway and dns are all empty. If your wifi happens to have one of these subnets (192.168.10.x or 192.168.11.x) use 192.168.12.x instead. Doesn't matter where.

All Replies

  • Sakura_TSakura_T Member Posts: 100  Ally Member
    You have to set interface for each ethernet port, they'll become a LAG if you assign the same configuration to them.
  • eozrocwdeozrocwd Member Posts: 58  Ally Member
    What is your IP address for both interface on NAS and what is the IP address of your PC? 
  • MijzelfMijzelf Member Posts: 1,498  Guru Member
    When connected to a 4 port 10/100 switch that I had laying around both pc worked fine but really slow. 

    Do you mean that you are not using a switch when connecting through gigabit? That can be done, but both PC's should be in a different subnet, and so should be the ports on the NAS. Else the NAS won't know which port to use to reach a certain PC.

  • atoposatopos Member Posts: 2  Freshman Member
    Most probably that is the problem then, could anyone post "reccomended settings" for lan1/lan2 (on the zyxel) and for the 2 Ethernet adaptors of the PC's?

    For example->

    Lan 1

    Ip address->?
    Subnet mask->?
    Gateway mask->?

    Primary Dns->?

    And what should I input on the Ethernet card on the PC

    Ip address->?
    Subnet mask->?
    Gateway mask->?

    Dns->?

    P.s The 2 computers get internet through WiFi so Ethernet won't interfere with other settings.

    Thank everyone for helping!
Sign In to comment.