Bug - NAS540 / NAS542 Port Trunking - Transferrate status wrong

masterflai · November 2020

If the ZyXEL NAS540 is connected via Port Trunking, the actual transfer rate is counted twice in the Status Center. In the example, a transfer is running from a QNAP NAS that is also connected via port trunking. There you can see that the current transfer rate is about 65 to 70MB/s. In the ZyXEL NAS, the double value appears. Obviously the actual transmission through port trunking is counted twice (about 126 to 140MB/s).

Image: https://us.v-cdn.net/6029482/uploads/editor/pp/ygz1p1w9i9fv.jpg

Image: https://us.v-cdn.net/6029482/uploads/editor/z6/jh3fp6fc4h74.jpg

lodiabai · December 2020

As I check on my router and the NAS, it seem the transmission through port trunking do not count twice. I'll check if it would happen from NAS to NAS

masterflai · December 2020

Thanks.

Bug - NAS540 / NAS542 Port Trunking - Transferrate status wrong

Comments

Categories

Consumer Product Help Center