Is it possible to disable 2.4G for specific AP's within the same SSID?
Options
In my use-case (concurrent operation) I do not need 2.4G for most rooms. However, there is no option to make this happen in Nebula. Setting it to the lowest 3dB seems the only way.
This is a waiste of energy and RF (beacons).
Is there another way for disabling this radio?
Thank you.
This is a waiste of energy and RF (beacons).
Is there another way for disabling this radio?
Thank you.
0
Accepted Solution
-
Hi @papu
You need to create 2 SSID one with 5GHz and one with 2,4GHz then you can use Tags to set them to dedicated AP, which should only display 5GHz or bands.
In Radio Settings you can put 2,4GHz to 1dB if you don´t want to split it.
Regards,
Tobias0
All Replies
-
Hi @papu
You need to create 2 SSID one with 5GHz and one with 2,4GHz then you can use Tags to set them to dedicated AP, which should only display 5GHz or bands.
In Radio Settings you can put 2,4GHz to 1dB if you don´t want to split it.
Regards,
Tobias0
Categories
- All Categories
- 384 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 77 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 898 Nebula FAQ
- 415 Security FAQ
- 234 Switch FAQ
- 205 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight