NAS326 extremly slow upload speeds
Options
Snyrkill
Posts: 1 
Freshman Member
Freshman Member
I just purchased a NAS326 and I experience extremely low upload speeds.
From Windows 10 (using Samba) the rate is around 5MB/sec (around 20 times less than advertised) and even less from a Linux machine using NFS (I have changed the /etc/exports to async). Via NFS it takes about 50 seconds to copy a 150MB file to the NAS, but copying it back takes around 8 secs (not great, but much better). The network is 1 Gig.
I get 10 Mb/sec with ftp.
I have installed the newest firmware, disabled the Twonky server etc. so the device is running at 10-20% CPU.
Thanks in advance,
-S
From Windows 10 (using Samba) the rate is around 5MB/sec (around 20 times less than advertised) and even less from a Linux machine using NFS (I have changed the /etc/exports to async). Via NFS it takes about 50 seconds to copy a 150MB file to the NAS, but copying it back takes around 8 secs (not great, but much better). The network is 1 Gig.
I get 10 Mb/sec with ftp.
I have installed the newest firmware, disabled the Twonky server etc. so the device is running at 10-20% CPU.
Thanks in advance,
-S
0
All Replies
-
Have you tried another ethernet cable cat6? or switch, switch port?
If you have shell access to the NAS, you can type 'ifconfig' to check your current connection status
0
Ally Member
Categories
- All Categories
- 442 Beta Program
- 2.9K Nebula
- 219 Nebula Ideas
- 127 Nebula Status and Incidents
- 6.5K Security
- 588 USG FLEX H Series
- 344 Security Ideas
- 1.7K Switch
- 84 Switch Ideas
- 1.4K Wireless
- 52 Wireless Ideas
- 7K Consumer Product
- 298 Service & License
- 477 News and Release
- 91 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 4.8K FAQ
- 34 Documents
- 87 About Community
- 102 Security Highlight
