New deployed nwa55axe shows ups as Wireless Bridge

vining · January 2023

in NCC, Access Points > Configure > AP & port settings as Wireless Bridge. Is this normal? I just added it via the Nebula app and I just want it AP mode, I'm trying to bridge anything.

Zyxel_Judy · January 2023

Hi @vining,

We found the same the symptom as you shared, and it should be a display problem, so we’ll fix it and tell you when it is done.

Please refer to status of Wireless bridge at Access point > Monitor > Access point > AP information page > Status > Wireless bridge before we fix problem.

Image: https://us.v-cdn.net/6029482/uploads/editor/ir/nvrc6y3xljtk.png

Please note that the status of Wireless bridge as Enable at Access Points > Configure > AP & port settings doesn’t affect to the AP mode and the AP still can broadcast SSID.

Thank you for this input.

vining · January 2023

thanks, I had looked under monitor > AP > Status and there wireless bridge shows off so it made no sense. As long as its just a gui bug and nothing functional I can live with it.

Zyxel_Judy · March 2023

Hi there,

We fixed the issue already.

When users add NWA55AXE into Nebula, Wireless Bridge is Disable as defautl at Access Points > Configure > AP & port settings and Access Points > Monitor > Access points > AP information page > Status. The Wireless Bridge status will be changed (Enable/ Disable) if users have new configuration.

New deployed nwa55axe shows ups as Wireless Bridge

All Replies

Categories

Nebula Tips & Tricks

Nebula Help Center