NAS 540 ethernet ports not working
Options
jcperez
Posts: 2
Hello, I have a nas540, which apparently the two Ethernet ports have stopped working. I have reset the Nas to factory mode. the beeps are ok, but the ethernet ports are still off. Any way to access the nas by USB port?
0
All Replies
-
I'm afraid not. Have you also tested the cable and the switch?
0 -
Thank you for answering Yes I have changed the cables, and the ports on the switch, without any result. (the two ethernet ports continue with the leds off). I have also changed the power supply for another with the same voltage. Without any result. So it looks bad.
0 -
So it looks bad.
Yes. Do you have the possibility to try another powersupply?
0
Categories
- All Categories
- 398 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 83 Nebula Status and Incidents
- 5.2K Security
- 99 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 923 WirelessLAN
- 35 WLAN Ideas
- 5.9K Consumer Product
- 212 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2.1K FAQ
- 1K Nebula FAQ
- 445 Security FAQ
- 238 Switch FAQ
- 213 WirelessLAN FAQ
- 47 Consumer Product FAQ
- 142 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight