Multy m1

Andrea94
Andrea94 Posts: 4
First Comment Friend Collector
in Multy WiFi System

Good morning, I am attaching the system diagram. I tried connecting the mesh line first, and then wiring it via the switch, but only the main router connects via cable, the satellite routers, even if connected via Ethernet cable to the WLAN port, are connected via Wi-Fi. For greater speed I should:
1: create three different sites?
2: Connect a modem instead of the switch and use it as a router/satellite
3: leave the system as it is.
I can't understand if, as in the diagram, the satellites are connected to the Internet via cable or via wifi, thanks

IMG_6035.jpeg

All Replies

  • Zyxel_Jerry
    Zyxel_Jerry Posts: 1,375  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 50 Answers 1000 Comments

    Hi @Andrea94

    Please install the satellite with wireless backhaul at first and after completing the installation, then put the satellite under the switch.

    If your Multy is far away between each other, you have the option to set up separate sites for each Multy device. You can then configure these Multy sites with the same SSID and password.

    Zyxel

    Untitled Image

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）