DHCP Domain Name configuration

DaviD42
DaviD42 Posts: 7  Freshman Member
First Comment First Anniversary
in Nebula
Hi,

Where can I configure the DHCP domain name using nebula for a USG Flex 200?

Basically I need the Zyxel DHCP Server to populate the Connection-specific DNS Suffix with our local domain name.

Thanks for the help.

David

Accepted Solution

  • Zyxel_Jeff
    Zyxel_Jeff Posts: 1,230  Zyxel Employee
    100 Answers 500 Comments Friend Collector Fourth Anniversary
    edited January 2023 Answer ✓
    Hello @DaviD42

    Welcome to the Zyxel community. You cloud refer to the below steps for how to configure it:

    SETP1. Navigate to Firewall Configure > Interface LAN interface configuration and add a new DHCP option. I use the lan1 interface with IP address 192.168.88.1 for an example.





    Option chooses "User defined", Type chooses "TEXT" and type the data to Name, Code, Value fields.



    STEP3. Navigate to Firewall Configure > Firewall settings and add an Address record.



    STEP4. If the PC connects to lan1 interface(with IP address 192.168.88.1) and would find the Connection-specific DNS Suffix has already been added.


    Thanks.


    241015_Speak-up,-Win-WiFi-7_Community-CSO-signature_1920x200.jpg

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP! https://bit.ly/2024_Survey_Community

All Replies

  • Zyxel_Jeff
    Zyxel_Jeff Posts: 1,230  Zyxel Employee
    100 Answers 500 Comments Friend Collector Fourth Anniversary
    edited January 2023 Answer ✓
    Hello @DaviD42

    Welcome to the Zyxel community. You cloud refer to the below steps for how to configure it:

    SETP1. Navigate to Firewall Configure > Interface LAN interface configuration and add a new DHCP option. I use the lan1 interface with IP address 192.168.88.1 for an example.





    Option chooses "User defined", Type chooses "TEXT" and type the data to Name, Code, Value fields.



    STEP3. Navigate to Firewall Configure > Firewall settings and add an Address record.



    STEP4. If the PC connects to lan1 interface(with IP address 192.168.88.1) and would find the Connection-specific DNS Suffix has already been added.


    Thanks.


    241015_Speak-up,-Win-WiFi-7_Community-CSO-signature_1920x200.jpg

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP! https://bit.ly/2024_Survey_Community

  • DaviD42
    DaviD42 Posts: 7  Freshman Member
    First Comment First Anniversary
    Excellent. Thank you very much for your help.
  • Zyxel_Jeff
    Zyxel_Jeff Posts: 1,230  Zyxel Employee
    100 Answers 500 Comments Friend Collector Fourth Anniversary
    Hi @DaviD42

    OK, you are welcome ;) !


    241015_Speak-up,-Win-WiFi-7_Community-CSO-signature_1920x200.jpg

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP! https://bit.ly/2024_Survey_Community

  • networx
    networx Posts: 9  Freshman Member
    First Comment Fourth Anniversary

    Dear,

    This option is missing for me. Please advise:

    USG FLEX 500H

    firmware V1.10(ABZH.0)

    DHCP Extended options is missing

    image.png

  • networx
    networx Posts: 9  Freshman Member
    First Comment Fourth Anniversary

  • macandmore
    macandmore Posts: 1
    First Comment

    same here on FLEX 700H… any Update on this?

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）