NAS 542 "Power Disable Feature"
Options
jahmon
Posts: 15 Freshman Member
I bought some larger drives and they have a pin 3 'power disable feature'. It means the drive won't spin up, OR with a jumper cable OR with a tape mod on Pin 3, it will work. Or it will work perfectly depending on if pin 3 is powered on the connector Anyone know if the 542 supports power disable or is the a backplane connector diagram? TIA
0
All Replies
-
Nas 542 has a power scheduling feature for the NAS itself, but as I know no feature for the hard drive.
0 -
Update: I applied Kapton tape over pins 1-3 and the drives are working perfectly. This is inconvenient, but the drives are enterprise grade.
0
Categories
- All Categories
- 398 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 83 Nebula Status and Incidents
- 5.2K Security
- 99 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 924 WirelessLAN
- 35 WLAN Ideas
- 5.9K Consumer Product
- 213 Service & License
- 339 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2.1K FAQ
- 1K Nebula FAQ
- 446 Security FAQ
- 238 Switch FAQ
- 214 WirelessLAN FAQ
- 47 Consumer Product FAQ
- 142 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 74 About Community
- 62 Security Highlight