NAS 542 "Power Disable Feature"
Options
jahmon
Posts: 15 Freshman Member
I bought some larger drives and they have a pin 3 'power disable feature'. It means the drive won't spin up, OR with a jumper cable OR with a tape mod on Pin 3, it will work. Or it will work perfectly depending on if pin 3 is powered on the connector Anyone know if the 542 supports power disable or is the a backplane connector diagram? TIA
0
All Replies
-
Nas 542 has a power scheduling feature for the NAS itself, but as I know no feature for the hard drive.
0 -
Update: I applied Kapton tape over pins 1-3 and the drives are working perfectly. This is inconvenient, but the drives are enterprise grade.
0
Categories
- All Categories
- 396 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 84 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 915 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 912 Nebula FAQ
- 419 Security FAQ
- 237 Switch FAQ
- 207 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight