NSA325v2 - Entware-ng - SAMBA - no samba after hot NAS restart

1235»

All Replies

  • aldapooh
    aldapooh Posts: 66  Ally Member
    First Comment Friend Collector Second Anniversary Community MVP
    edited July 1

    Ok, another finding and it seems to be related to entware-ng.

    in the post above I told that newly created shares are not visible via FTP, but visible via SMB.

    so I disabled entware-ng and connected via WinSCP via FTP. voila! I can see all shares including new ones:

    image.png

    and File Browser now displays everything as expected

    image.png

    Regards, -A

  • aldapooh
    aldapooh Posts: 66  Ally Member
    First Comment Friend Collector Second Anniversary Community MVP

    and then I did another test

    • i disabled entware-ng
    • i created a new share "testsharewithoutentwarengenabled" in the hope that may be it would be visible via FTP if created when entware-ng is disabled
    • i checked with disabled entware-ng via FTP - the share was visible
    image.png
    • as soon as I enable entware-ng FTP does not show shares I created recently
    image.png

    so again I am not blaming SambaReplacement and my issue might be very unique to my screwed up configuration or a very old NAS325v2, but anyway this is an interesting finding.

    what I would recommend to anyone is doing "Configuration Backup" as often as possible, because in my case it was part of a remedy. another part of a remedy was to manually remove two pid files blocking start of SAMBA in /opt/var/run as Mijzelf suggested

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）