Wireless SSID not visable

Dpj · July 20

Yesterday i had an strange thing. i have 3 wifi networks. but i just can find 1 (on both laptop as phone). all networks are enabled, and offcourse not hidden SSID. I didn't have time to investigate it yet, but i see this in the logging:

2 ports control blocks? what does this mean?

Can it has something to do with it?

I will investigate it later further.

Zyxel_Tina · July 21

Hi @Dpj,

Thanks for sharing the log.

The message ZDP: initial port [number] control block indicates that the Zyxel Device Protocol is initializing the control process for a network port. You may refer to this FAQ for more details on what this log means.

https://community.zyxel.com/en/discussion/24015/what-does-the-log-zdp-initial-port-1-control-block-mean

As for your issue with only 1 SSID being visible (while all 3 should be), we also recommend checking this FAQ as well to help troubleshoot and resolve the problem.

Zyxel_Tina · July 21

Hi @Dpj,

Thanks for sharing the log.

The message ZDP: initial port [number] control block indicates that the Zyxel Device Protocol is initializing the control process for a network port. You may refer to this FAQ for more details on what this log means.

https://community.zyxel.com/en/discussion/24015/what-does-the-log-zdp-initial-port-1-control-block-mean

As for your issue with only 1 SSID being visible (while all 3 should be), we also recommend checking this FAQ as well to help troubleshoot and resolve the problem.

Dpj · July 21

Thank you Tina, Yes i think it had to to with the time schedules. Not completely sure, but now they are sending

Wireless SSID not visable

Accepted Solution

All Replies

Categories

Nebula Tips & Tricks

Nebula Help Center