Hi all, Can anybody help with a step by step guide on how to recover the original firmware? I have tried to follow the steps found on this forum on all the threads related to zyxel nas5.. boot loop. None of them worked :( The problem: I have installed OMV on a SD card and everything was fine until i wanted to expand the sd disk to the entire capacity 64 GB. After this step none of the firmware's worked and the nas entered in a boot loop. The nas gets an IP address but the is not reachable over SSH or telnet. As i said above i have tried everything i found on this forum including the recovery stick, nothing :( Current situation: i have managed to connect to the nas box with a serial connection i have also tryed b0 b1 b2m none of them works, i get "bad magic number" i don't have all the command found here on the forum like the one "setenv" is not recognized I am attaching the printenv output and reset output

but "zyxel.diskstation.eu" is not accessible. Try zyxel.ddnss.eu

Zyxel nas542 boot loop after installing OMV

Options