-
Slow wifi due to mismatched country codes?
Hello all! I have a self-assembled mesh system here, consisting of a NBG6604 (as access point and router), a NBG6503 (as access point) and two WAP3205v2. All devices are connected with Ethernet cables as backbone, have the same SSID, and use channels 1, 5, 9 and 13 (on 2.4 GHz). This configuration has worked without…
-
Lost access to my EMG2926 router dashboard during port forwarding
Good day all, Hoping some one can help. Recently I was trying to port forward so that my kid could host a personal blog / website on our Synology DS220+ NAS, located on our zyxel EMG2926 router at home. During the process, I accidentally rerouted access to the router dashboard (192.168.0.1) to the NAS (192.168.0.103), and…
-
Why does my EX3301-TO no have TR69 option?
Hi, As the title says, I dont have any option for tr69 under remote management. Thanks
-
zytel t50 remote management by default
hello, I experienced that my zytel T50 is resetting to factory settings even after simple reboots operation (not all the times but it is happening). This is of course disabling remote management settings (http/s acces via Wan) which I can’t set back when I’m abroad because the adim interface is not accessible anymore. Did…
-
Remotely configure network access for Zyxel EX3301-T0
I have a Zyxel EX3301-T0, and would like to be able to control network access on it (for a predefined set of devices) from Home Assistant. In other words, I would like to remotely change settings under Security -> Mac Filter or Security -> Scheduler Rule. I've looked at SNMP (preferable) and ZySH through SSH, but is unable…
-
C1100Z: How to disable AP Isolation
With the Zyxel C1100Z using firmware: CZW007-4.16.012.15, wireless devices can not talk to each other. It makes it impossible for a cell phone on the network to monitor a camera on the same network. How can I disable WiFi AP Isolation for none guest devices?
-
Finding password for WAP 6804 that was reset by NOC?
Our NOC tested and reset the Wap 6804 that i used, and apparently the original stickers were gone or damaged, because the only stickers on the WAP are a serial number and MAC sticker that looks like it was just printed on a home printer. I have this installed at a customer that is way out in the country, and am trying to…
-
Firmware Upgrade EMG3525-T50B
Please advise where I can upgrade firmware for EMG3525-T50B
-
VMG3925 B10C Cellular Backup problem
Prior to lockdown I was supplied with a VMG3925 B10C by my ISP. It became the centre of my little network getting internet access through ADSL. Since lockdown ended, I travel much more, but only need to use my home network for a couple of months at a time; an ADSL connection does not look viable. I am hoping to use a 4G…
-
Power up VMG3625-T20A did not provide Internet access
Today powering up my VMG3625-T20A router did not provide Internet access. See attached system log extract lines 107-44. I then performed a Reboot from the Maintenance section and the Internet access was established. See system log extract lines 43-1 (ZyxelLog_10042023.pdf). The router was powered off in the afternoon of…
-
Parental Control Profiles
How many Parental Control Profiles can you make on a XMG3927-B50A is it 12 as Its not letting me make another (13)
-
how disable WPS in VMG3625-T50B
i have VMG3625-T50B and updated Firmware to V5.50(ABPM.7.3)C0 and after instal this update cant disable WPS. now how can be disable WPS?
-
Zyxel P-791R v3
I have Zyxel P-791R v3. (sn S182S48000015) It is not worked. How i can burn\change firmware on this router. Can you send\give me a firmware and instructions for this model? my email: egor.dev@izhservice.ru
-
Router DX5301-B2 - USB file sharing acros SMB v2/3
I have this router from the B4RN ISP. I am trying to set up file sharing for video files on an USB connected SSD drive connected to the router. I can see the folders on the USB and have set up sharing on the router GUI. Is the OS of the router Linux?Should it connect via SMB v2 or v3, or is it accessible using another…
-
dnsmasq 'local' domain configuration [XMG3927-B50A]
Hi, If there is a plan to release a firmware update for the XMG3927-B50A at some point in the future (please do :) ), could I request the addition of the 'local' config option to dnsmasq? This should inform dnsmasq that the domain set in 'Maintenance > System' is local and it may answer queries from the hosts file or DHCP,…
-
MTU on IPv6 over IPv4 tunnel [XMG3927-B50A]
Hi, After enabling '6RD', i.e. an IPv6 over IPv4 tunnel, basic IPv6 connectivity works, but I'm experiencing significant timeouts with a subset of sites. This is perhaps best illustrated by a large number of failures in the 'Other IPv6 Sites' tab on https://test-ipv6.com/ I initially suspected a problem with Path MTU…
-
Zyxel DX5401-B0 router assigning new devices to the 192.168.0.nn instead of 192.168.1.nn
Hello everyone, I hope you're all doing well. I'm having a puzzling issue with my Zyxel DX5401-B0 router, and I was hoping someone here might be able to shed some light on it. Here's the problem: My Zyxel DX5401-B0 router has always used the default 192.168.1.nn network for assigning IP addresses to devices connected to my…
-
how am I able to connect "o2 homebox 6641" with windows 11 explorer?
-
Change or recognize already installed Ethernet connected devices?
How do I get the EX3301-T0 to recognize my Ethernet connected devices? I changed the network name and password to match my old router so WiFi devices connected but I think the DNS was changed on my hardwired devices. I've searched in settings but can't even find a list of any device let alone being able to change the DNS.…
-
Zyxel DX3301-T0 VLAN
Hello, I am trying to connect a Zyxel DX3301-T0 with a Zyxel DSLAM VES1724 via VDSL.This works, but when VLAN is used this does not work. The VLAN should be passed on over the DSL line to the DSLAM. On the LAN ports of the DX3301 both the standard network and the VLAN should be tagged via the VID.Has anyone tried something…
