-
LTE7460-M608, firmware update issue
as title says, firmware update does not go trough. After uploading on management page, comes FAIL-popup. Current FW version is:V1.00(ABJW.1)C0 in Zyxel firmware download page, also in ftp-page all FW's are V.1.00'(ABFR.x)C0i have tried update firmware also via telnet/tftp programs, no luck/i didn't get right commands.…
-
FWA710 Port Forwarding issue
Hi, I can't get Port Forwarding on my FWA710 to work in order to access my NAS from outside the local network. FWA710 runs in Router Mode, no additional router is connected to the network. Default IP of the router is 192.168.8.1, and for bridge1 it's 192.168.1.1. All local network devices get an IP in the 192.168.1.xxx…
-
LTE5398-M904 Firmware Updated ??
LTE5398-M904 Firmware Updated ?? :/
-
Cant recognize SIM from Carrier Orange on NR5101
I bought NR5101 and I dont know what I should do atm, the router seems to not recognize the carrier Orange (Spain) since the last fw update V1.00(ABVC.6)C1 , I have to work with another carrier as Movistar without any problem since the update. I think you had the same problem time ago on NR7101, and solved it with the…
-
5g NR5103 Router - Unlocked branded 5GEE
Hi, I have a NR5103 with is 5GEE branded, but unlocked. I can use with other networks, but would like ot put the firmware to the standard Zyxel. How can I install the firmware? There is no option in th 5GEE settings to allow me to select a firmware version - it only allows online download of the 5GEE versions
-
NR5103: Three UK Firmware - Security Question
Dear Zyxel, i'm evaluating to buy an used Zyxel 5103E modem that have a THREE UK brand from an user of Aliexpress in China. The product is perfect like new. Firmware that i can see that is installed is : V1.00(ACBJ.0)b12 and is branded Three UK My only complaint, as the product is used and is selled on Aliexpress and Ebay,…
-
5g NR5103 Router - Unlocked branded 5GEE
Hi, I have a NR5103 with is 5GEE branded, but unlocked. I can use with other networks, but would like ot put the firmware to the standard Zyxel. How can I install the firmware? There is no option in th 5GEE settings to allow me to select a firmware version - it only allows online download of the 5GEE versions
-
LTE7490-M904 Updates
Module Firmware R01A07-R01A08 https://www.dropbox.com/s/knahqrugfmha9p3/Update_EG18EAPAR01A07-R01A08.zip?dl=1 Firmware ABQY.6 https://download.zyxel.com/LTE7490-M904/firmware/LTE7490-M904_V1.00(ABQY.6)C0.zip
-
NR 7101 Firmware Update
Good day Zyxel Community, I want to upgrade my NR7101 from the Version V1.00(ABUV.3)b1_E0 to the newer ones. On the firmware website I couldn't find my exact version and I would need some help with it. Is it possible to upgrade from V1.00(ABUV.3)b1_E0 to 100ABUV4C0 ? Thank you in advance and have a good sunday, SJW
-
LTE5388-M804: SIP not able to register when in Cellular IP Passthrough (Bridge) mode.
I have a requirement to have the external address hosted on the interface of the downstream firewall (behind the M804) to host services behind the firewall (not the NAT'd internal address). When the M804 is in Router mode, I can made and receive calls using the voice function and associated SIP account on the unit…
-
Modem firmware for Nr5101
Good morning, I am the owner of a Zyxel Nr5101. I am quite satisfied with the modem, I have seen that there have been several upgrades for the browser interface, however the modem firmware has remained at the version from 2 years ago. Unfortunately with this version it is possible to aggregate only one 4G band when…
-
NR7101 Can't connect to builtin WiFi
I have a NR7101 with firmware 100ABUV8C0 and would like to connect the Zyxel Air App in order to find the best signal. But I can't connect to the built-in WiFi. I'm using 3 different devices (iPhone, MacBook and Android Tablet), none of them can connect. The Apple devices just spin indefinitely ("joining WiFi…"), and the…
-
NR5103E - HOW TO CHECK NR CONTRIBUTION TO UPLINK PERFORMANCES?
Hi everyone, I am at the edge of a 5G cell with RSRP-NSA around -107 dBm (N78 band). The NR5103E shows that both LTE (primary/anchor) and NR bands are being aggregated, hence supposedly contributing to uplink performances… unfortunately it seems that NR is not adding value as uplink performances remain the same when I turn…
-
Some questions about NR7102
Hello! I have purchased a brand new NR7102 router. Here are some questions I would like to have insight if possible. Zyxel Air app speedtest issue: I have tried using the Zyxel Air app but it doesn't help me much in installing the router properly. The in-app speedtest is totally different than the speedtest done through…
-
LTE7490 MTU setting missing
According to the LTE7490 manual, the following page (Network Setting -> Broadband -> Modify/Edit WAN Interface) should have the MTU setting, but it's missing on my LTE7490 GUI (latest firmware), showing only the following options: The problem: images won't load properly (very slow) on hs.fi & is.fi news sites (image…
-
zyxel lte7461-m602
I have updated to the latest firmware. I have explored both the web based menu and the app and I cannot figure out how to set the WIFI (2.4) to stop turning off. I see in the manual and firmware release documents that the default is 30 minutes for it to be on (with the blinking amber light) but I cannot figure out how to…
-
auto reboot LTE3301-PLUS
Hi, is it possible define scheduled autoreboot LTE3301 model or just for brandband interface ? #SP_Feb_2020
-
NR7101 GNSS
I upgraded from LTE7480 to NR7101 after 5G came available to my location. Is there a way to use the GNSS functionality of the device in some fashion? Ie. Is it possible to get location or time data (NMEA messages) to devices on the local network? I tried to search for info but couldn't find any.
-
NR7101 Why multiple LAN Interface Groups?
What's the idea of having multiple LAN Interface Groups? - Default: 192.168.0.1 - Bridge1: 192.168.1.1 - Bridge2: 192.168.2.1 - Bridge3: 192.168.3.1 - Bridge4: 192.168.4.1
-
nr5103e external antennas
is there any one that can tell me which of the four external antenna connections are port 1 and port 2 or cell 1 and cell 2 please.
