-
NR5101's samba server extremly slow
I bought the NR5101 for the samba ("USB service") because I want to be able to access an external device with my PCs - but unfortunately, it's seems pretty useless. I only get speeds of approx. 900 to 200kb/s when connecting to a device via NR5101's samba server. Copying files to the mounted device is a pain and takes…
-
NR7101 Lan Config question.
Hi, I've just put up a NR7101 as a test bed ahead of trying to get my clients to upgrade from MikroTik to this device but am not able to configure the LAN settings with passthrough disabled. The device shows LAN settings as 192.168.1.0/24 but with the passthrough switched off and using the device as a DHCP/DNS server i am…
-
LTE3302 modem issue
Hi My LTE3302 has stopped working properly and I'm getting a "Sim not ready" error. When i check the LTE modem status page it isnt showing any details for the modem in the router. I have tried upgrading the firmware and also downgrading the firmware and also doing a factory reset but none of this seems to work and it still…
-
New SIM card not working on LTE3301-M209
I've just switched for a new SIM card due to new internet supplier and its not working at all. All I get is flashing red indicator. Can it be that the new card is an actual phone SIM and not a data SIM? Can the LTE3301 not handle the phone SIMs?
-
ZyXEL LTE5398-M904 bad wifi range
Hi, I installed the aforementioned router, all works ok besides the wifi range. It's much much worse than the previous router despite having stronger antennas. I suppose it might be wlan country setup related, I tried changing it through ssh but have no idea how. It has ZySH shell and 'set wlan country enable' command is…
-
NR5103EV2 USB SHARE Storage size
I have the 5G router, when I connect a 128Gb flash drive to the usb port, it is visible in the USB share tab on network router page, however when I connect a 2Tb drive it is not recognised. What is the size limit of the attached share drive?
-
LTE7460 https://192.168.1.1 - can't reach the server
LTE7460 https://192.168.1.1 - can't reach the server Green light flashes Any ideas? Is it dead?
-
Lte7490-m904
Non riesco ad aggiornare il firmware qualcuno sa aiutarmi ?
-
Is there a way to turn off LEDs on Nr5103ev2?
... Is there? Or can the function please be added? They're really annoying, and when the device is to be placed on a windowsill as recommended they also scream 'please break my window to steal me' to would-be burglars... Thanks!
-
Upgrade Firmware LTE5398-M904, not band 1 work
Hi, I updated the modem to version 12 of the LTE module (released by you). It no longer aggregates band 1 with the other bands, nor does it use only band 1 to navigate. I would like to downgrade to version 8, the one previously installed. Can you carry out the procedure remotely? Or can you possibly pass me the file to…
-
How to make apple airprint work on an lte 3316 dual-band router?
On the old lte3311 mono-band router airprint worked fine. On the new lte3316 I can reach the GUI of the printer from a macbook and an iphone alright but when I want to print it says no printer available. I have turned off the 5MHz band to force all devices on the 2,4 MHz band, but that seems not to solve the problem. What…
-
NR7101 periodically resets to factory settings
I have upgraded to the latest firmware 1.00(ABUV.8)C0 because of minor problems connecting via 5G which is solved now. Since the upgrade the zyxel device periodically resets to factory settings at night. I think it is related to a scheduled reboot. If the scheduled reboot is turned off, it still resets to factory settings…
-
NR7101 401 Unauthorized
Good morning everyone, I recently purchased the NR7101. Everything perfect so far except that after a few days or after several logins if I try to connect to the 192.168.1.1 home page I get the error "401 Unauthorized". I have also tried creating a new user in addition to admin but the problem persists. I have the latest…
-
FWA510 external antenna conection - do I need to connect all four?
Hello, just bought the FWA510. In the manual there seems to be two external antenna connectors but on the box itself there are actually four. Do I need to connect all four, or which ones?
-
Can I hide admin and password on display LTE2566-M634
Hello, we will use the routers on users without admin account. They must not change the config. Additional we want hide the WiFi password (from SSID). Best regards Matthias
-
ZYXEL LTE2566-M634 - spare parts
Hi, I have zyxle lte2566-m634 with broken screen. Is there somewhere I can get a screen to replace it in the device?
-
NR7101 Nebula Zyxel air won't connect
I'am new here (just bought the NR7101 Nebula) and i can't connect the Zyxel Air to the router. It's up and running but want to check/optimize the signal. I see the SSID, I scan the QR-code but ik keeps saying the username or password is not correct whatever i try! I can connect with my phone to the Zyxel netweork so the…
-
5G Broadband External Modems.
Hi All, Am new to this part of the forum and am looking to start offering my customers 5G Internet connections as am starting to see a swing towards Starlink where FTTP isn't available. Have traditionally used MikroTik equipment for 4G, but they have nothing to offer for external mounted 5G hardware so Zyxel could be my…
-
My Nr7102 has missing or not working options
recently got a new Nr7102 and the device interface is a mess there is no scan option on lte 4g band lock(the option exist on my other router the nr7101) there is no scan option on 5g band lock(the option exist on my other router the nr7101) log file freezes the interface after firmware update V1.00(ABYD.2)C0 the cell id of…
-
Mapping a new cell site with Zyxel Air
Until recently. I lived in a remote rural location in Northumberland with no mobile phone coverage from any provider. However, a new mast has been built on the other side of the valley, about 1.2 miles away. It provides O2 and VF services. Using Zyxel Air, under Signal Strength, there is a facility labelled 'Map' which…
