-
web interface for multy x ac3000
is there a way to configure the Multy X AC3000 by web interface? the huge advantage is that you can configure the Multy X AC3000 for ever and not depending on the app #Multy_May_2020
-
Multy U: enabling "bridge mode" results to the brick
Is there any way to investigate what causes an issue with the bridge mode?Thank you!
-
Multy AC2100 loosing internet connenction
I have a network with three nodes. The primary Multy is wired to the WAN-modem. Some of my clients are loosing connection randomly with a frequens of several pr day. Other clients seems to be less troubled. The problem seems to be simular to others on the forum. /Gj
-
Zyxel Multy U AC2100 WiFi Mesh keeps dropping internet
I have two devices in use. Upstaris and downstairs. Upstairs is connected to my main modem (has the 4g sim). Downstairs device is connected via cable to the upstairs unit. Issue is that the downstairs one is frequently dropping internet (LED light goes red). After a few minutes internet is back on. Upstairs one is not…
-
ZyXEL Multy U regularly drops connection
I have recently bought Multy U (set of 3) mesh routers. My setup is Virgin Media Super Hub3 in modem mode, connected to Multy U to provide Wifi/wired networking in a house of on average 30-40 active devices, ranging from Laptops, smart phones, to NAS and IOTs etc. We have found that on average (though the frequency is…
-
Can’t add Multy X devices to app
The Multy X devices have been stable for years and I think I’m running on old FW. I tried to reset all devices and add them in the app again, but it just gets disconnected. If I setup more than one devices, the second fails during the sync. I also followed that guide that it said that app will notify for important update…
-
Zyxel Multi X replacement
Guys been using 3 Multi X units for 2 years and i have to say Bulletproof devices, anyway the demon in me wanted WIfi 6 so i went Orbi pro, what a mistake that was. Random Issues with Phones in house just not getting internet till Wifi is turned on and off on Phone, to their rubbish DNS, which looks like its a proxy in the…
-
Definitive answer on maximum number of nodes for Multy X
I currently run a two-node network using ZyXEL Multy X Tri-Band AC3000 units. I want to expand as we're moving to larger premises and according to Amazon three nodes is the maximum but on these pages and the main site four is often quoted - and some posts claim more can be added. These units will preferably use a wired…
-
I want to switch devices between 2,4 and 5 Ghz without separating the SSID's
Hi, I have Zyxel Multy 3-pack Mesh. My Chromecast has automatically connected to the 5Ghz network and I'm wondering if there is a way to change that in the app? A way to chose which frequency band to connect to without separating the two SSID's. Thanks in advance
-
Multi X drops Wifi randomly
I have 4 Multy Xs throughout the house, 1 Primary and 3 additional nodes in Daisy Chain topology. Our phones keep getting the Wifi with "no internet", which means it is connected with IP to Multy but is not getting any data. Mostly happens when we walk from one room to another, but many times my phone sitting in front of…
-
Why do devices continuously loose connection to the Multy Plus unit?
Devices continuously loose connection to the Multy Plus unit, however I can go in the Multy App and everything seems OK. Restarting the unit is the only way to get the devices re-connected. Happens 1 a week, if not more. Thanks.
-
Multy U (wsr30) issue to connect 2nd node
Hi, can someone advise, what may I do wrong? i bought 3 Multy U (WSR30). Installing the primary device through Ethernet cable was smooth, and works fine. I am trying to add a 2nd node to extend WiFi range. When going through the installation steps, additional Multy is found and connected through Bluetooth, but location…
-
Multy X - Android 11
Hi, Has anyone complained of any phones not being able to connect to Multy X 5Ghz wireless? Since my Samsung Galaxy Note 10 was updated to Android 11, I sometimes notice that I have a 4G connection instead of my internal 5Ghz wireless network. The only way to reconnect is to restart my phone and then it is fine for a day…
-
Multy X and WPS
Hi How do i get WPS function on the Multy X?
-
how do i add another multy x
how do i add another multy x we have 2, we had to unplug the 2nd one, so had to reset when plugged back in, reset he primary one, working but the second one is buetooth failure, it always worked until then, nothing had changed, can you help?
-
Multy X (WSQ50) Firmware
Hi, What is the latest firmware version for the Multy X? In the Multy X app, I see V2.20(ABKJ.4)C0 which it states is the latest version. But in some posts here, they mention later versions of the firmware. If there is a later version, how do I get the latest version. usually my Multy X (Android 11) app would detect a new…
-
Allow users into network
Hi I'm missing a feature that was available like 3 installations ago... i want to get prompted on my Iphone when someone is trying to access my network and via the Iphone grant that person access to my network or not. Please advise
-
Registering device on Zyxel cloud
When trying to register my multy plus on zyxel cloud i only get "! not found" in red? I've entered the MAC and SN that is printed on the backside of the 1st router Please advise
-
How to setup multiple home wifi networks
I would like to have several separate networks setup in a wireless router. I envision a ‘public’ network for guests with cell phones, Alexa/Home devices which must connect to the internet. I also want to have most of my home automation devices in a network which does not have access to the internet, such as IP cameras,…
-
Multy U - red indications
What do I do. Its says that its offline and check power connection. I have checked power and backhaul. Its seems to work or not ??? How do I remove these red info ??? Brian
