-
What is the best mode to use my 3 Multy Xs provided that my gateway is a ZYWALL 110 /switches ?
Zywall 110 feeds switches that provide ethernet backbone for a 4 story house . My 3 Multy X are needed only for wireless . Right now they are connected -1 primary via ethernet the other two connected wireless . Is there any better way ? (speed and coverage)
-
How to manage multi x in bridge mode?
Hello! We have WSQ50 and want to use it in bridge mode.Once we switched it to bridge it acts like bridge, but we lost an ability connect to it using application and so we can't manage it. How to manage multi x in bridge mode? Thank you!
-
Where can I buy the mouting accessory for Multi X AC3000?
Where can I buy the mouting accessory for Multi X AC3000? I can't find them in the telekom webpage...
-
Multy X permanently blinking white
A Multy X which has worked for several years will now only flash its LED white when starting up, no matter how long it is left. As it never flashes blue I can't add it back to the network. It cannot be reset (I understand reset does not work in this state). Is there any way to fix it?
-
Lan port speed max 100Mbit Multy X
I have one Multy X connected in bridge mode to my network, the wan connection shows as 1000Mbit in the app, wireless devices are getting constant 600-700Mbit download rates, but all other lan ports show connected at 100Mbit, even though they are all capable of gigabit connetion. What can I do? I have submited feedback from…
-
How does mesh work?
I have installed mesh as Multy X + Multy mini. When I move with my laptop from the one access point to another, I see freezes when I’m on the call. Should mesh behave like this?
-
Multy U 2 sites / bridges in one LAN?
Hi, I have a home network with cable connection to 2 floors. I would like to configure 2 multy u access points both as bridges, so they would work as access points sharing same SSID. I seem to be only able to add the second AP as satelite under the primary, which means connecting through primary via WLAN backhaul. I tried…
-
Disable 5ghz on multy U
Hi, Is it possible to do radio management on a multy wifi system? I have 3 x WSR30 Multy U access points and they are great, but i would like to disable the 5ghz radio on some of them. I think this is pretty basic feature and most competing mesh systems allows this level of management, so was quite surprised not to find it…
-
MyZxyel account setup required in order to ask a simple question?
I’m not a business customer. It’s crazy that Zyxel or any company asks for your address, phone, email silliness in order to join an online community to ask a question. Hopefully, it’ll be as easy to remove my user information after my issue is resolved.
-
Offline multy won't delete from app
How can I force a multy that is 'offline please check the power connection' to be deleted from the app - when I try to delete it just says 'Delete Multy "null"?' when I press delete and confirm it just resets the app and says connecting to my home and then continues to show the blank multy. Ive been trying to add a new…
-
Diffenent LAN IP on my third Multy X
Hi, I have had connected 3 Multy X together for 3 or 4 years now, without big issues. Now they are starting to annoy me.. The main Multy gets it regular IP, 192.168.212.1, the second one first got IP in 192.168.38.x range, the third one aswell. I then reset all the Multys, with same result. I then switched places between…
-
I have 3 Multy U (WSR30) connected using wi-fi backhaul and are having problems using the LAN port!
I'm unable to connect a device/PC to one of the Multy Extenders (i.e. not the root) using the LAN port, any idea on what the problem could be?
-
Multi App not communicating with Multi X units after IOS15 up grade.
I can't get my Multi X units to communicate to the Multi App. My iPhone 8 updated to IOS15 on Tuesday night and since then have not been able to connect to the Multi X units. All the app gives me is the Home Screen and "Connecting" at the top but nothing happens. I would like advice on what to do.
-
What to do when Multy U (WSR30) fails to upgrade firmware?
When the Multy app prompts a message to tell you that Multy U (WSR30) fails to upgrade firmware, the possible reason is that Internet was disconnected during firmware upgrading. Please check Internet connection first. If Internet connection is alive, please reset and reinstall Multy U (WSR30).
-
I cannot get the Multi X App to connect to the Multi X network.
Hi, In November this year I purchased FTTH with BT. At the time I re-connected the 2 Multi X units that had been working fine for the previous year to the new 900Mb/s network. All has worked fine until yesterday when the secondary unit based in our garden studio dropped out. I have found it impossible to re-connect to the…
-
So now what?
Hi. I do not know what to do from here. I cannot enter the main menu from the app. So i really cannot use the Multy U.
-
New firmware to fix the IOS app access issue
Glad I checked the forum before and not blindly press the button to update the Multy X firmware. I feel sorry for all those who have IOS 15 and have this issue since December. It could have easily been me. Now, it’s been 2 months and no news. a.) Why don’t you retract a bad release so that when people open the app, they do…
-
Comparison between Multy X and the new Multy M1
Hi Consider to buy the new M1 but do not know if this is model are better than my currently owned Multy X? Anders
-
My Zyxel providers disconnect once every third day. Help!
Hey I got some issues with my Zyxel U. In general i love it because it provide excellent internet all over my appartment. But lately it's begun to have some trouble, approx every third day it turns "red/disconnected" - And i have to setup the whole system again. So my question is, does anyone know the issue, or can help me…
-
How long does initial firmware upgrade take (initial install, last step - I think).
New Multy user. Initial install successful except for last step where Multy App announced a firmware upgrade required. It's been spinning my phone for 35 min. Is this usual? I'm using an iPhone 5se, iOS 14.8.1, wifi enabled and connected, phone signal 1-2 bars.
