-
Multy x mesh Speedtest
My normal speeds test results on my Speedtest app average 600 Mbps download and 94 upload. The multy app used to give the similar speed result. But these days it shows upload of only 2 Mbps when the Speedtest app still shows 94 as upload. Also is cat 8 cable good to use for the Multy x or is cat 7 better ? Please reply…
-
Multy U nodes stops working sporadically
Hi. I have three Multy U nodes in daisy chain configuration in my house (topology: ArcherC9 Router->MultyU#1->MultyU#2->MultyU#3, bridged the Multy's). This setup works fine after first setup but within 48 hours the second Multy U node will stop responding (red blink and app says it might not have power). At this point I…
-
Speed test show 0 on upload
Hi, my Multy show zero on speed test on the upload. Using my own Speedtest show good results. I saw that you had same issue in early 2019. #Multy_Aug_2020
-
Error message: multiple wifi detected
I'm trying to setup my Multi X, but when trying to setup the main unit I get the above error message, and setup can't move on. I've switched off all wifi signals at home - neighbors' are still active though. I've tried resetting the unit as the guide suggests. I've reset my network settings on my android, but nothing…
-
Does Multy X have a WPS button?
Because WPS is a less secure method to
establishing wireless connection, Multy
X does not support WPS. Instead, Bluetooth connection is used for setting up the 1st node and the 2nd
node of Multy X with very easy operations.
-
Multy X - In app speed test
Hello, I have a 1000 Mbps connection, and when I test the speed (both wired and wifi) I get somewhat close to this. But when I use the in app speed test, between internet and my router (main router), I never get more than 480-490 Mbps. Is there a cap/limit on the in app speed test at 500 Mbps? #MultyX_Feb_2020
-
Does the multi WSQ50 support MER option 61 login?
Hi, I have been searching for ages and have not found the answer. I have the multi WSQ50 which I used to use as my main router with virgin media (hub in modem mode). I have just moved to a sky broadband area and wish to carry on using the multi. From what I have read I will need a new modem which would then mean the multi…
-
Speed clarifications and settings Multy X
I have a 1 GBPS internet connection... However when doing a Speedtest through the Speedtest application on my iPhone, my average speeds around the house on Wi-Fi is between 200-250 MBPS... present it is all at default settings with daisychain switched on. I want to know if daisy chain is a better option for me when on or…
-
Multy X - Daisy chain config
I understood Multy X didn’t operate as a true mesh network – it used a star configuration in which all nodes talked directly to the router. An update was promised in March that would add support for daisy-chained configurations, has this happened with the new v2 firmware? I’m considering buying a 3 piece system.…
-
Can I use two Multi X on the same system?
Hi - I've seen a great deal on a multi x and multi mini pack, and I was thinking of buying two for my fairly large house with lost of connected devices. My plan was to have one multi x connected to the existing vodafone modem, one multi x next to my TV so the sonos, tv and PS4 can be connected to it via ethernet and use…
-
One of my multi X is giving a strange issue: BLINKING WHITE, RED EXCLAMATION MARK IN APP ETC.
So I have 5 nodes of MULTY X in my house. One of them recently has been showing a RED EXCLAMATION MARK in the app and when I go to it it says: "CHECK POWER CONNECTION THIS MULTY IS OFFLINE" but the power is on! Then the exclamation goes from RED To ORANGE suddenly and the white light starts to blink. WEIRD AGAIN. Wonder…
-
loosing connection multy U
Hi! Have major problems with this mesh. It fails over and over again to have a steady connection with chromecasts and printers. Any ideas? The two chromcast audios i hce connected direct to the hub via ethernet and it works ok, but more problem with the regular chromecasts and epsonprinters. I have 4 multy. regards / Lars…
-
How to change WiFi channel on Multy X
Since ZyXEL in its infinite wisdom decided not to let the user select a WiFi channel, you have to resort to the following trick if Multy X decided to choose an unfavourable channel. 1.You need another WiFi access point right next to you do NOT want the Multy X to be. Place this access point right next to the Multy X root…
-
Multy U time switch
Dears, Is there any time switch available for Multy U ? I would like to deactivate WLAN over night. If not, 1. how could that be realized ? Smarthome available. 2. Is there any plan to realize it ? 3. Is there any other access point available with that feature ? Many thanks for any feedback ra1967
-
Can I control or how do I tell which node I am connected to (Multy X and/or Multy Mini)
How can I find out which Multy X node I am connected to on my network or if I am connected to my Multy Mini. If you can check this, can I force a device to join a specific device upon arrival? Thanks T #Multy_Jul_2020
-
Can the Mini be wall mounted?
I know the Multy X is a desktop preference but the Mini has some screwholes, so wondered if this can be on the wall...or ceiling? Thanks T #Multy_Jul_2020
-
ICMP - enabling pinging the Multy X
Is there any way to enable ICMP? Right now my Multy X doesn't seem to respond to pings from outside. #MultyX_May
-
Blocking dns / youtube on devices group multy x.
Hey, I'm wondering how to block youtube / or specific dns using groups or specific devices. The only thing I seem to be able to is to control the overall internet access for devices. How do I do this? Also I tried using my browser to access the router but it says page not found when I go to my router address. Thanks!
-
Multy X - Slow Internet Connection
Hi, I'm using a three multy X system in Bridge Mode. My Internet is connected via a Netgear Router with 1gbit duplex. Devices connected to the router via LAN do get the full gbit. The Main AP is also connected via LAN to the Router, but can't acive more than ~90mbit down and about ~100up. I checked multiple cables and…
-
Facebook login
I am using the Multy app and have previous logged in with Facebook. For some reason I have been logged out of the app and when I try to log in again via Facebook I get an error message saying that the app is not configured and that the app is still under development. Any idea how to remedy this?
