-
[NEBULA] How to use NAT mode on AP?
Where to find: Configure > Access point > SSID advanced settings > Traffic options Function description: NAT mode is used to have the AP create a DHCP subnet with its own NAT for the SSID. Provide minimum hardware requirement for Wi-Fi of small shop/caféIf AP management IP address is NOT part of “10.0.0.0/8”, SSID subnet…
-
[NEBULA] How to configure SSID schedule?
Nebula provides user to setup the schedules
which can be applied to the SSIDs. The SSID is enabled or disabled at the
specified time. There are several schedule template or user can configure
schedule period. Click Configure > Access Point > SSID advanced settings to achieve it. Following
the steps: 1. Select the SSID…
-
[NEBULA] How to configure the AP Security with WPA2/3 Enterprise
Figure
1 Using WPA2 Enterprise authentication The example shows administrators how to configure the AP Security with WPA2/3 Enterprise. There are two ways for using WPA2/3 Enterprise for an SSID, Nebula cloud authentication, and My RADIUS server. Note: All configurations are used as examples in this article. Please replace…
-
Why Android devices don't display Captive Network Assistant (CNA)?
When the strict policy is set to 'Allow HTTPS traffic
without sign-on', the captive portal does not show up automatically because Android devices will use some HTTPS pages to test
connectivity when detecting captive portals in wireless networks. As
the HTTPS traffic is allowed, the captive portal landing page pop-up (CNA)…
-
[NEBULA] How to configure MAC-based Authentication for Wireless Network
MAC-based Authentication allows you to protect your network from unauthorized users without requiring your end devices to input or apply any security settings. 1. Go to Configure > Access point > SSID Advanced Settings and select the SSID. 2. In the Network access section, select "Open" or "Enhanced-open" or "WPA Personal…
-
[NEBULA] Is it possibile to customize the HTML of captive portal? If yes, where is it?
Is it possible to customize HTML of captive portal? If yes, where is it? Yes, it is possible to edit the HTML and CSS code of captive portal if you wish to customize it to your own style or layout. You can either edit HTML through Nebula control center, or edit the template provided on NCC and host the portal page through…
-
[NEBULA] Do I need to add facebook.com into Walled garden when using Facebook login?
Do I need to add facebook.com into Walled garden when using Facebook login? Answer: No, when configuring Facebook social login it is unnecessary to input facebook domains as NCC will automatically apply the domains needed into the walled garden.
-
[NEBULA] How can I allow access to certain websites before client is logged in?
How can I allow access to certain websites before client is logged in? Scenario: I have captive portal configured and wish to allow certain websites to be able to visit before the client has signed in, what should I configure? The feature for this requirement is called Walled garden. The walled garden function allows users…
-
[NEBULA] How to block traffic between guest and employ SSID?
How to block traffic between guest and employ SSID? Scenario: Deploying only NAPs, how can I configure to block traffic between guest and employee SSIDs? The answer is to use L2 isolation. Layer 2 isolation will only allow the traffic of whitelisted destination MAC addresses. In this case if we configure L2 isolation and…
-
[NEBULA] How to steer/encourage the utilization of 5G band?
How to steer/encourage the utilization of 5G band? In Nebula, to utilize clients under your network to use 5Ghz band, there is an option to steer the clients to use 5G band, called "Band select". When enabling this function, by default it ignores 8 probes and 3 authentication requests sent under 2.4Ghz from a client…
-
[NEBULA] How can I configure to separate SSIDs between NAPs?
How can I configure to separate SSIDs between NAPs? In the scenario if you wish to allow AP1 to only broadcast SSID1, and AP2 to only broadcast SSID2, what are the required configurations to do? The answer is to use the SSID Tag function, the concept is the AP will broadcast the SSIDs which share the same tag as the AP…
-
How can user avoid the wireless disconnection when the AP change the channel by DCS?
Yes, this is provided through the “Enable DCS client Aware” feature. The APs on your network do not change channels as long as any wireless clients are connected to them. After you enable the feature, the AP will do DCS only when the all clients are disconnected with AP at the doing DCS time. You can use the schedule DCS,…
-
[NEBULA] How to setup Facebook APP ?
This is the follow-up based on How to setup Facebook Social Login? 1. Login to Facebook Before creating a developer account, login into your Facebook account. Create Facebook account 2. Create Developer Account & Create Facebook APP You'll need Facebook developer account to get started. If you don't have one, upgrade your…
-
[NEBULA] How to setup Facebook Social Login ?
Prerequisite: NAP Phase II Firmware is required to support Facebook social login. What is social login? Social login refers to single sign-on and signs into third-party social networking services such as Facebook, without the need to create a new login account and is able to acquire the existing client's information. It is…
-
[NEBULA] How to configure Nebula WPA2-Enterprise(802.1X) SSID auth with Nebula Cloud Authentication?
Nebula Cloud Solution provides the option to let users authenticate into wireless networks using WPA2 enterprise with Nebula Cloud Authentication option, offering the possibility to create and storage user information on the cloud, being efficient by reducing the time and effort that requires to set-up a radius server.…