-
DNS Server in SCR50AXE
Hello, we have a SCR50AXE with three Vlans. I have three VLANs with different IP address ranges, the PIHole with the IP address 192.168.168.117 must be entered in each interface. So also with VLAN 5 with IP 192.168.170.x and VLAN 3 192.168.171.x? Or the ISP or Router? greeting Niro96
-
Assign a static IP to a client in Nebula.
We have a USG Flex 500 and are trying to assign a static IP to a device. We can not find though where to do so.
-
NSG50 WAN Failover preferred line setting seems broken
Hi! When I configure an NSG50 with two wan lines and failover configuration with a preferred line it initially works fine, if the preferred line fails, it switches over to the secondary line. However wen the perferred line is up again it does not switch back. this leads to performance issued and high cost for my customers…
-
Is the guest WiFi on the Nebula managed dhcp limited to a certain amount of ip addresses
-
Mesh AP's as wireless bridge
We would love to see the option to use Mesh AP's as a wireless bridge.
-
Multicast traffic filtered by NWA50AX AP
Hello, I have a wired device on my local LAN hosting services that are discovered by mDNS. The multicast packets are filtered by the wireless AP (NWA50AX) before they arrive to the wireless clients. Is there a way to disable multicast filtering on the AP? Thank you.
-
VPN user account no longer works
We have an end-user that as of this morning their VPN will no longer authorize them to connect. All other users within this organization authorize fine. And his was working yesterday. But this morning it will not recognize. I've tried it on Windows 10, windows 11, and MacOS. I've tried resetting the password but it still…
-
2 zyxel dont work anymore, but the light shines green, what can i do.
in the app i dont get into the zyxels
-
How to use Antenna ports in Nebula FWA510 ?
Hello everyone I am using zyxel fwa510 and living in an area with 4G only ...and the 4G signal is poor. The router has 4 ts9 external antenna ports and I need your help to choose which pair of ports is for 4G (band 1 2100 mhz and band 3 1800 mhz only are available here). I am using Kaser Panel V3 antenna mimo 2x2 (two…
-
NWA50AX as an Extender only
Hi, I have a NWA50AX managed via Nebula. I need to have an access point (location is within an outdoor office where I do not have a LAN cable. Is it possible to use the NWA50AX in the hut acting as a range extender of my Zyxel Broadband router.
-
How to disable the message "ZTP is already enabled"
Good morning! I have the same problem with the VPN 100 device, back on January 26, I logged into the device in the old version of the administration panel. Now the message "ZTP is already enabled." appears. How do I get back to the old device login?
-
SCR50AXE and Nebula
Hello, since this morning the orange LED on Nebula has been lighting up on our SCR50AXE. This means that it cannot connect to the NCC. It had previously worked for 23 days. Should we just wait and see? Greetings Marcus
-
[ATP/FLEX] is ATP500 config compatible with USG FLEX 500 H?
Sorry it may be a duplicate, can we export atp500 configuration and import into a USG FLEX 500H?
-
How to block an unknow device from accessing my wifi router
Hi How to block an unknow device from accessing my wifi router, just discovered that there is an unknown device thats connected to my router, how do i block it? I changed the password but it seems as if the divice is still connected.
-
NWA50AX - wifi client looses connection
I have two NWA50AX at my site. One (living room) is hard wired to my modem the other (central hall) is wireless connected to the root AP. Smart mesh is on, as well as Smart steering and DCS scheduling. Also Assisted roaming and 802.11r are enabled. All works okay, but there is one device/client (smart wifi speaker) which…
-
Driver Realtek RTL8188CE Wireless LAN 802.11n PCI-E E NIC não encontra a rede Zyxel
Um computador formatado com Windows 10 e driver Realtek RTL8188CE Wireless LAN 802.11n PCI-E E NIC, não encontra redes Wi-Fi da Zyxel. O equipamento Zyxel que estou usando é um WAX610D. Uma foto da placa de rede está no anexo.
-
My new FWA510 does not function when trying to connect to an external antenna
I recently got the FWA510 and hooked it up today. It works just fine when not having any external antenna connected, but the second I try to connect one it is unable to make any sort of internet connection and I have no idea why. I have tried everything I can think of but have no idea why this would be an issue.
-
INVALID_PORTAL_SUCCESS_URL when creating or editing new SSID
Using: 3 access points NWA1123ACv3 (fw: V6.40(ABVT.6) ) Android app version 17.30 and Nebula Cloud Portal on Windows 10 Chrome, Firefox and Brave Browser lastest versions. error 1 (using android app): When creating and saving a new SSID in my Android app i get the error message: INVALID_PORTAL_SUCCESS However: When…
-
Wifi connection slow and unstable WAC6103D-I V6.10
Hello, Hardware: 3x Zyxel AP WAC6103D-I; V6.10(AAXH.8) The wifi connection from my Zyxel AP's is suddenly very slow and really unstable. I've got this problem on all 3 AP's. If I connect with a cable directly to the router and to the LAN1 port on the AP, I got no problem. You can find some speedtest results below (all the…
-
FWA510 5g Router not working correctly with wifi
Hi I've purchased a FWA510 5g router for a customer that has to move out of their London office 2 months. The router its self is working with 4g/5g with mobiles connected via wifi. but when i connect a laptop via wifi i get ACTION NEEDED,NO INTERNET. but i am getting wifi. APN is set for Vodafone internet web web Chap &…
