-
Acces to NAS326 from Internet without public IP
Hello, So I have NAS326 which I would like to have access to from Internet, but my ISP does not give public IP address. Also this NAS326 requires very strange UPnP version I think, because it did not work with 3 routers I had, which had this functionality, but Zyxel NAS was not able to see it (it was able to see NBG6515…
-
NAS540 Fan
Hi,the fan in my NAS is getting loud. I need to replace it. Has anyone done this yet? Which fan can I use? Is that 4-pin or 3-pin connector? Have unfortunately found no instructions on the Internet.
-
Running setup NSA210
I am trying to set up an NSA210 that was given to me new a few years ago but I haven'y got round to doing anything with it until now. I have unboxed it and plugged in all the relevant cables along with a new HDD (Seagate Barracuda) and have put in the supplied disk. I can get so far along with the setup but a) it…
-
NSA325 v2 - No LAN port response
Dear, I was suddenly not able to reach the web page of my NSA325 v2, SMB was still working and my TV was able to play my media files from the NAS. I rebooted the NAS which seems to properly react on the front button but now it seems the LAN port is not doing anything anymore :'( . The LEDs are blinking but Wireshark shows…
-
NAS542 - Out of space on 3 disk RAID5 array - now stuck
As above, I have a 3 disk RAID5 array that ran out of space, this the main array in the unit. I added a separate disk later that was not put in as a spare and is hosting other data. Now that the RAID5 array has run out of space, the entire unit has become 'stuck'. Initially, after a reboot, I was able to login but couldn't…
-
NAS540 - Can any data be recovered?
Unit died last night and is showing 2 drives as empty and 2 as hot spare. Screen shots added. Any suggestions on how to recover any of the data? Thanks all
-
Zyxel NAS542 - EU
Hi, my NAS died, but I think my HDD are untouched. Can I swap the unite with the same model and access the data on my HDD? tnx
-
NAS542 - LAN to LAN copy
Hi all, I bought a NAS542 for Home use. I actually own a D-Link DNS320 with 2x2TB. I'm starting with a single 4TB in NAS542, planning to make it as a backup of DNS320. I cannot find a way to use BackupPlanner to copy FROM D-Link to NAS542. My final result should be a full backup of D-Link in my new NAS542. How can I…
-
NAS326 After Plex Installed: Needs to add Local Movies\Music\Photos
OK! I am looking at adding Local Movies\Music\Photos into Plex Server after I installed it. I am not sure how to do it at this point in Plex to the locations of these files on the NAS. Did anyone that already has Plex Server up and running already got their local contents added? Please assist. Thanks in advance. Should it…
-
I don't have any app to download on App Center (NAS540)
My dad bought this nas it run in raid1 with 2tb disks, but we can not download apps from the app center as it writes Dowload List Fail? We have updated to the latest firmware V5.21(AATB.7) and made a RestoreFactory Reset. Maybe you know what the problem is or who we should write to?
-
Installing the Perl module IO::Socket::SSL on NSA325v2 NAS
I'm trying to install the Perl module IO::Socket::SSL on my Zyxel NSA325v2. Reason for this: the Logitech Media Server running on my NAS requires this, otherwise the Spotty Spotify plugin doesn't work. When trying to configure the Spotty plugin, I'm getting the following error : "Spotty requires the Perl module…
-
FYI entware samba replacment
Hello,I install via opkg the samba replacmentto use smb2.since I Haven t no samba access,even the NAS utillity app doesn t workIf i remove it , all these things work again.everybody knows why?
-
NAS 542 doesn´t boot anymore, no USB-Stick is working, Serial connection is working
Hello again in this forum, i tried out Debian with OMV on my NAS 542 and at first, it was working. After Reboot, b1 was damaged and i executed b2 with a fine boot into the zyxel System. From Zyxel-System i did a flash with the USB-Stick with stock firmware. After the next reboot, nothing did a boot, neither b1 but b2. Both…
-
PC-guest account
How to disable/delete PC-guest account on NAS326?
-
Looking for a 10GbE switch
Hi :) My Router is equipped with a 10GbE RJ45 (copper) port.I am currently looking for an affordable switch with the following characteristics: - 2x 10GbE ports (one to connect to the router, one for a potential 10GB client machine). - 6 or more gigabit ports (each capable of the full gigabit in parallel, no shared…
-
NAS320 unable to upgrade to larger hdd size cannot init appliets: [Errorno 2] No such file or direct
NAS320 unable to upgrade to larger hdd size cannot init appliets: [Errorno 2] No such file or directory: '/i-data/md0/.system' I'm in desperate need for someone with cli experience. I am the owner of a NAS320 (latest version of firmware 4.81) who's been working fine for few good years (first version) with 2 x identical 2TB…
-
Migrating raid1 HDDs from broken NSA-device to NAS326
Hello there, I'm stuck in my tries to migrate two raid1 HDDs from an old NSA-device to a brand new NAS326. I installed only one of the old HDDs into the new NAS. I'm asked to format/create a new volume and the new device doesn't recognize the old layout/volumes/files. I've read that some people seem to have had success…
-
NAS326 also usable via USB3 like USB hard disk?
Hello. In addition to connecting to the network, can I also connect a device (or two) via USB, and then access the data on the NAS326 from this device via USB3?Faster than via LAN.
-
Network drive - double deleting
In the main NAS Starter Utility, I adding the NAS folders (video, photo, music...) as a network drive in Windows Explorer. Problem is, when I try to delete some folders in network drive, when i click "delete" all files from folder are deleting but folder stay exist. Then I have to click "delete" again, afther that folder…
-
compatibily with ubuntu and wd red pro
Hi, the NAS542 it's compatible with ubuntu and western digital red pro 16 tb ?