-
[Solved] NAS540 Volume Down ~
This is RAID 5 on NAS540. One disk has degraded, but clicked the repair option, no help. I can access the web interface, but not able to access my files. Can use any commands to fix this problem? Thank you in advance! #NAS_Sep_2019
-
Unable to access to my NAS326 through web | conexion HTTPS unable.
Hey guys I have a nas326 and I checked a HTTPS conexion option, now I cant connect to it through web, I dont have SLL certificate, what can I do to access ? #NAS_Sep_2019
-
NSA325 V2 Largest harddrive for this Nas
Hi i currently have this nas with 2 x 4TB drives. The drive is using the latest firmware V4.81(AALS.1), I would like to upgrade to 2 x 12TB drives. Can you tell me if the drives will be accepted into the enclosure and if not what is the maximum drive capacity allowed or is it a case of trial and error rather than firmware…
-
NAS542 Remote access
Hello everyone, I have a NAS542 and everything works fine in my local network, but I can't access it from outside network, except for Zyxel Drive app. zCloud works in the local network, but from outside it gives me this: Some of my UPnP settings are disabled and I can't seem to enable: My NAS is configured with Link…
-
NAS540: Update of MySQL?
Is there a way to update MySQL version from current (5.1.73) to more up to date(like 5.7) or even to MariaDB 10.2 (or newer)? #NAS_Feb_2019
-
NAS542 - Administrator Icon not available.
Hello everyone, I bought a NAS542 and as it is shown in the User-Manual there should be a Administrator Icon in the desktop view of the webinterface. But in my case there isn't an Icon called "Administrator".Could anybody tell me how I can access the administrator view of the webinterface? see screenshot, nr. 6 is missing:…
-
Disk Group / RAID is Degraded on a NAS540- How to fix it?
My NAS540 recently started beeping aggressively, prompting me to enter the WebUI. I was able to log on and I got a message that said my RAID was "Degraded", and that I had to enter Storage Manager to repair it. Entering Storage Manager I see that Disk 1 is being grey, while the remaining 3 shows as active. I then have the…
-
CPU Overload and high ping while doing nothing
Hi everyone, I'm having issues with my ZyXEL NAS 326. Opening documents was suddenly became so slow that I wanted to check ping and discovered it was about 600ms and around values. Had a look at admin panel and found CPU usage at 100%. So I rebooted the NAS but it was again at 100%. There was "python" on the top of CPU…
-
Default inlog + password don't work when starting the installation wizard
Just connected the NSA325 v2 to my modem/router, installed the NAS_Starter_Utility programme. And the programme found my device. When I want to run the instalazion wizard, I have to fill inlog password. The instructions say to fill in: admin (as login) and 1234 (as password)... however, this doesn''t work? --> " incorrect…
-
How to expand volume on NAS326
I had 1TB + 2TB disk in 1TB Disk group (and 1TB volume on it) - RAID 1 - I suppose. I changed 1TB disk for new 2TB disk. Than I repair RAID 1. After this I want to expand the Volume to 2TB.... but... only thing I was able to do, was to expand the Diskgroup 1 to the whole capacity (2TB). Volume 1 remains 1TB, so I want to…
-
Why did Dell laptop lose connection with NAS326
Recently my Dell laptop can't reconnect to my NAS326. LED's on array not flashing and only three top lights on. Need to recover files from NAS326. Currently using direct cat between them. Previous cat 5 from NAS to Gateway when failed. #NAS_Sep_2019
-
Can i install the unifi controller on my zyxel nas542?
It is possible to instal the unifi controler on zyxel nas #NAS_Sep_2019
-
Which HDD to use when replacing failed HDD in NAS540?
Hi All I have a NAS540 with 4
Seagate Baracuda 2TB HDD installed.
The NAS540 is beeping and the Storage Manager says “Volume1 is
degraded.” shows that the 3rd
HDD has failed. ( Actually does not show “Disk3” at all) I cannot find the same
model of Seagate Baracuda 2TB HDD available any more. There are other 2TB
Seagate…
-
How do I defragment drives in the NAS?
Is it done automatically? I don't see a way to manually do it and it isn't mentioned in the KB or manual. #NAS_Sep_2019
-
How can I convince iMAC Time Machine to stop failing backups
After a period of use of NAS 326 without iMAC Time Machine, I reconnected Time Machine, which does its job but refuses to complete a backup. I don't know where to begin to fix the error. #NAS_Sep_2019
-
Entware-ng install error on NSA325v2
I have installed Mijzelf's Metarepository no problems, but when I try to install Entware-ng it gets to 25% installed then gets a status of Unknown with a no entry sign after it. I cannot find any reference to this error elsewhere. Can anyone give me a clue? #NAS_Sep_2019
-
I have a ZyXEL NSA-220Plus which works fine on a direct Ethernet link to a Lenovo laptop, I wish to
I have a ZyXEL NSA-220Plus that works fine on a direct Ethernet cable to a Lenovo laptop, I wish to interface it to a MacBook Air via a HooToo Shuttle with a direct Ethernet cable. All lights are correct but I can't see the Zyxel box. I believe this can be a setup issue on the Mac, can you help please? #NAS_Sep_2019
-
NAS325 HW failure - how to obtain data from discs?
Hello, the hardware of my NAS 325 died :/ So, now I have two RAID1 discs but how to recover data from them? If I buy NAS 326 can I use these discs? Will the new NAS recognize the old data - or if I configure it to RAID1 it erase my discs to fresh state...? Any recommendations? Thank you for response! Roman #NAS_Sep_2019
-
NAS542 Nearly full
HiI use my NAS542 as a media server and have 4 x 3TB discs as 1 volume and formatted as JBOD.Its now getting full (90% left) and can't think of what to do next, was thinking of getting 2 x 10TB again formatted as JBOD then copying files onto this then replacing the 4 discs with these 2 leaving 2 spaces left for…
-
Symlink doesn't work with user
Hi!My problem is not easy but hopefully can solve somehow... So, I created a "main" folder on my NAS, which contains some symlinked folder. I would like to reach all folders under one network drive on my PC. I set some users who should has reading and/or writing rights for one or more folders. If I map the "main" folder…
