-
PLA6457 ethernet connection has stopped
PLA-1st: connected to modem via ethernet cable PLA-2nd: connected to PoE injector (Ubiquiti U-POE-AF) via ethernet cable, which connects to IP camera (Hikvision DS-2CD2086G2-IU) via ethernet cable Alternative setup for testing: PLA-2nd: connected to a laptop via ethernet cable The setup with IP camera functioned (ethernet…
-
PLA6457 default admin password
Yesterday I bought four PLA6457 but anyone haven't default admin password (not on labels or boxes or manuals). Where do I found this?
-
I need the lastest firmware fpr my NSA325-v2
I need the lastest firmware fpr my NSA325-v2, because I have lost it and the factory reset doesn´t work
-
Where is the support/download section for AX7501-B0
Hello, Having issues with my new AX7501-B0 (10g fiber router): short Lan drops, long Wifi drops (with several devices, even facing the routeur). I would like to know if there is a new firmware to fix these issues or if my routeur is faulty. Thanks in advance.
-
Wi Fi connection issues with EMG
Hey, for quite some time now I have been having wi fi connection issues with my EMG3525-T50B router. Given to me by my isp and most likely a firmware update would fix this issue as I am on "Current Firmware Version: V5.50(ABPM.2)H0". Serial number: S210Y26030282
-
XMG3927-B50A 5GHz Wifi dropout
Every few hours, the 5GHz network on my B50A drops out - the light on the router itself remains lit, but stops flashing, and nothing can connect to the 5Ghz WiFi. The 2.4Ghz channel is fine. This happens whether they share a SSID or not, and on auto channel or fixed. I see some other discussions on the same issue, but no…
-
EMG2926-Q10A SMB and MacOs
Hi, I have configured SAMBA (to access a USB drive) on the router including the users and passwords but the ID and/or password are rejected when connecting (Finder/Go/Connect to server…). Using MacOS Sonoma 14.1.1. Any solution?
-
how do i port forward for a minecraft server so me and my friends can play?
I have a c3000z and century link I'm not really a tech or a web designer so i have not much concept for all that stuff but i do know i need to put in my public ip address, tcp udp, ports (25565), and allow firewall but after all that it doesnt seem to be working. I checked what the problem was and it was apparently the…
-
LAN Management of VMG4005-B50A
I have a VMG4005-B50A in bridge mode. On starting the bridge with the router I cannot access anymore the management interface of the VMG from the LAN. My idea was to use two different tagged VLAN on the LAN link. One for the bridge and one the management interface. I tried by using the vlang groups but without success. And…
-
PLA4231 CLI access
Hi all, I have a powerline kit with PLA4231 ad master, trying to access in telnet/ssh I get the prompt to input username/password by I cannot enter with the default one (admin/1234) or the same I set on the Web GUI. Do somebody know what are the right credentials or there is no real support for ssh/telnet. Thanks in advance
-
Rndis unreported feature of Zyxel WAH7601 Portable Router
Hello Im new here. I just discovered on my Linux that router connected through USB works as rndis device. It can be considered convenient but it is unreported way of use in User Manual. As I understand planned way to use device is as WiFi router with common security protection. As rndis device router does not require…
-
Zyxel c1100z 80/10 Service Question
Service is 80/10, cleared stats recently (as you can tell) because I just finished installing alight motion the home-run to the modem, and I have the rest of the house disconnected for now. Stats are below. I get a retrain sometimes kinemaster 1-2 times in 24 hours or less. Sometimes there are 30-60 Near-End CRC errors.…
-
EMG2926 and WPA3
Hi, I want to know if my Zyxel EMG2926 is WPA3 ready or I will need to change it. Tanks you, #CPE_July
-
VMG3925 and DFS
When I try to scan wireless channels with my VMG3925 it gives the following warning/error: "Channel scan process is denied because current channel is a DFS channel (Channel: 52~140). If you want to run channel scan, please select a non-DFS channel and try again." I'm using 2.4 GHz Wifi with channel "auto" or 1 and 5.0…
-
AX7501-B0 WPS can't be disabled
Basically I would like to hide my SSID, but for this the WPS shall be switched off. On the respective page the switch is grayed out, can't be switched off. In the manual it is mentioned the switch is grayed out when the wifi is OFF, but my wifi is ON, so I am stucked. Any idea how can I manage to hide SSID in this case or…
-
USB printer connection lost.
My USB printer connection lost.
-
Connect PPTP VPN via NR5101
I can not connect my vpn thru the nr5101 router. I have activated PPTP ALG but is still dont work. Works fine with my old router. Please help.
-
issue with power line extender
Dear Zyxel, i have an issue with the power line extender. it drops all the network done I'm using to communicate between Multicast (port) service and IPTV box. when i connected the switch get haung and i have to reconfig and all the network drop down antil i dessconnect the switch
-
SIM card stuck
I removed sim card "accidentally", pushed it back but am not able to remove it again. Seems like the card is stuck somehow. Any tips?
-
VMG8823-B50B, V5.13(ABOV.0) how to setup DuckDNS settings
I need help to configure the modem VMG8823-B50B, V5.13(ABOV.0)b1_20180824 from Tiscali, to activate the DNS as "DNS user defined". Actual settings: (not working)- "Tipo di connessione:" (connession type), tested both HTTP and HTTPS- "URL di aggiornamento:" (URL to be updated) here used: https://duckdns.org/update/my…
