-
Upgrade to 5.13 from 5.11 VMG1312-B10D
Hi, I'm trying to upgrade from 5.11 to 5.13 and all that occurs is the router rebooting but no upgrade. When I try again, a message pops up saying illegal Image and then seems to disconnect the router from the internet, leaving only the Power LED green. I then have to force a reboot. Any help would be appreciated…
-
p-660hwp-d1 router not accepting firmware update
Having had this brand new router sat on my shelf for about 5 years thought it was time to use it, unfortunately the homeplug side won't connect to my existing hp-av network consisting of two TP-link hp-av units and one zyxel pla-4321. No problem i thought the tplink units did the same but were fine after a firmware update,…
-
IES-1248-51V support H248 (MEGACO)
Hi, i have 1248-51v while looking in to the config i am unable to locate H248 option, can any body tell this box supports or not? what i assume that i am running V 3.53 (ARY.7) 07/20/2014 which seems very old ,if possible kindly share me the latest version that supports h248 on my email: shaukat1011@gmail.com Thanks…
-
set IPSec tunnel on AMG1312-T10B
Hi everyoneI have two ADSL modem router AMG1312-T10B to use internet from two different ISP in two different location. I would like to connect these two network together.Is any one help me to configure my devices. Thanks. #CPE_May
-
Update Firmware by USB
Hi Folks, have a VMG3925-B10B router and I need to replace the firmware, but I cannot login to the webpage, I wanted to plug in a USB with the firmware loaded on it, and see if I cold upload the firmware bypassing the login page. Can anyone advise? #CPE_May
-
Cant see my 5G spot on NBG6604
Hello, I bought this router and did all the setup. I see my 2,4Ghz band on list, but my 5Ghz band wont show on list although i can configure it. I checked if my device supports it and it does, also I updated drivers. #Router_May
-
Wireless band 5GHZ disappeared (Zyxel VMG8823)
Hi all! I have got a Zyxel VMG8823. I tried to configurate the 5Ghz Band but i am UNABLE to do it. When i try to switch from 2.4Ghz band to 5Ghz band...I just cannot do it. I tried with another browser, even with mobile browser. I've already done Factory Reset, from Setting page and from the tiny button behind the modem,…
-
Nach Update kein Zugriff mehr auf Videos und Musik im Wlan
Hallo Liebes Forum Team, Ich habe seit meinem letzten update kein Zugriff mehr auf meine Videos und Musik Ordner jedoch der Ordner Bilder so wie Bilder in dem Ordner Videos werden mir angezeigt. Folgendes wenn ich mein Samsung TV anmachen erkennt er den Zyxel NAS 520. Wenn ich davon nun meine Videos (im video Ordner)…
-
PMG5317 T20B
Good afternoon. I have a question about the model PMG 5317 T20B. I need to know if lan ports can be configured in giga or any other speed.#CPE_May
-
what is the difference between TLS PVC and Normal PVC(vci/vpi) ?
what is the difference between TLS PVC and Normal PVC(vci/vpi) , How can we make use of this feature ? #Others_May
-
How to configure 2 PVC on same port with and without vlan , while having 1 ethernet port for egress
Hi All, I am using DSLAM IES-1000 and model: AAM1212-51/IES-612 DSLAM, where I m trying to do the following configuration: CPE -------0/33-- and 0/37 with vlan2-------------DSLAM --------SW -----PC1 and PC2 where I am configuring 0/33 and 0/37 with VLAN2 PVCs on my CPE and DSLAM i configured 0/33 pvc with PVID1 and 0/37 as…
-
Can't boot into new armor x1
I just bought a new armor x1. When I connect the power it flashes green for hours. I've tried a factory reset but the behaviour never changes. It broadcasts a ssid but won't give me an ip address I have tried to connect it to my computer both with wlan and lan but I won't get ip address. I've also tried to set the ip…
-
Opened Port but not seems to be opened
I open my 25565 port on my Access Point but i can't reach my port on another IP adress.
-
PLA4241 does not turn on home light nor in powerline not extender.
how can I reset fully the devices, does have power on and internet light on, but home light is not. I have tried different wasy of rested, but cannot get those working. note I have never ugrade firmware but does nto know how to update it. I get the file, but how to install? on the website does not recognize the Mac nor…
-
Can't connect the router to a WiFi-repeater
Hello, I have just received a Zyxel VMG8324-b10A internet modem from my provider (my previous modem broke some days ago). I tried to connect this Zyxel modem with a Wifi repeater (Dymond 2.4g) but without success: the repeater can't add this new modem in the list of Wifi networks in the surroundings, nor connect with WPS.…
-
Help with “logs and reports” Please help. Sorry if this is repetitively asked...
First thing, again, I want to apologize for my lack of knowledge, when it comes to my VMG4325-B10A! :s <3 I am am curious how I view the logs/sites visited etc as I could on my Lynksy, I’m very unfamiliar with Zyxel. Anyone mind taking a few to put it in “for dummies” terms???!!! :# I’d be forever grateful!!! I’m a single…
-
disabled HTTP assess to router settings by accident
how do i change this so i can go on my settings? #Others_May
-
SBG 3300: Firmware fails to update
I’m currently trying to upgrade the firmware on my UK model SBG 3300, to the latest firmware.SBG3300-N000_1.01(AADY.8)C0. Neor some reason the .bin file will not upload. After almost an hour it is still uploading which suggests that it may not be the correct one for this model even thought it was loaded from the Zyxel…
-
I have a C3000z Century Link branded modem and I can not find any info?
This is a ZYXEL manufactured modem so why is there absolutely NO information about YOUR product on your website ANYWHERE? It is not referenced, if I try to put in a model number or even a serial number I get NOTHING. Even if it is branded and Century link might have some information they do not or are not releasing the…
-
Modem AMG1302-T15C firmware
Hello, I'm trying to find the modem firmware, but I can not find anything on the Zyxel websiteCurrent Firmware Version V2.00(ABBZ.0)b10_v3 #CPE_March
